Artillery Model Springfield Stock

[twines]

What is the acceptable length of the wood for an artillary model Springfield?

Thanks

Tom
McGregors

[Muley Gil]

Overall stock length, including the nose cap, is 44.25", with a 1/2" tolerance.

[John Holland]

Time out! The stock dimensions depend on the barrel length.....32" or 33"?
Which one are you using?
JDH

[Muley Gil]

My mistake. I was looking at the spec sheet I used and forgot that is was definitely marked "Short barrel version", which is for the 32" barrel.

My apologies.

[John Holland]

Gil, no apology necessary!

Tom - If you are using a 33" barrel the OAL stock length is 45.25", +/- 0.50".
If you are using a 32" barrel the OAL stock length is 44.25", +/- 0.50".

Write to me direct and I will email you copies of the SAC sheets, jh44ny (at) Verizon.net

JDH