please delete

[Nathan Bowen]

I am looking for a sharps ringtail bullet mould any help would be apreciated.
Thanks
Nathan

[Charlie Hahn]

What size are you looking for?

Charlie

[Nathan Bowen]

I have an IAB sharps rifle Made in italy. Thats all I know.
Thanks

[cgtactical]

Google "Rapine Bullet Mold" The size you need is .544475. It is .544 diameter and 475 grain weight, but be ready they get about $100 for one and it takes up to 6 weeks to get it! Dixie Gunworks sells the bullets already cast for $36 per 100.

[Charlie Hahn]

I work on all types of Sharps, and they are not always what you would expect. Is there any way you can measure the bore? I expect that the .544 is the prime candidate, but would like to be sure.

I have both moulds, (not for sale) so I could send you some of each then you would know for sure, would want you to cover shipping.

NEI can make a mould resonably fast if you are willing to take aluminum blocks. I just got one in 3 days.

Charlie
410-208-4736

[Terry Davis 10639]

I have a shilo, and I slugged the bore with an oversize bullet. After tapping it down the bore, the major diameter is 0.540. I was planning to get a sizing die for .541, or should it be bigger?

Terry

[Nathan Bowen]

Thanks for the help...I have decided to sell the gun and try shooting my original 1863 springfield musket.
Thanks
Nathan