can anyone refer me to a person who does the flash channel reline in a smith? six years of shooting have started to enlarge the hole in the breach. thanks Marv
can anyone refer me to a person who does the flash channel reline in a smith? six years of shooting have started to enlarge the hole in the breach. thanks Marv
comp#11604 DEL BLUES
Larry Romano.
Edwin Flint
14th Mississippi Infantry, N-SSA
Deputy Commander, DS Region
Daniel Whitacre did mine 5 or 6 years ago. His workmanship is excellent, the turn-around time was minimal, I thought the price was reasonable.
Dan Mastin
2929
Check with Jim Brake.
Fletcher Pastore
Cockade Rifles
thanks for the info. marv
comp#11604 DEL BLUES
Hey Marv I'm hyjacking your thread. Can anyone add to this by explaining the methods that are actually used to solve the problem. Do they bore out, weld and redrill or bore out, thread and put a plug in then redrill? Inquiring minds want to know. Its only a matter of time before I have to tackle this same job. Marv bring it down to the Nats I want to look at it. Kurt.
LArry Romano uses a TIG welding and rebore method. Uses your loading tubes to match up everything.
Edwin Flint
14th Mississippi Infantry, N-SSA
Deputy Commander, DS Region
Thanks Ed, Kurt.
Bookmarks