Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Lube to make a smoker round

  1. #1
    Join Date
    Apr 2007
    Posts
    126
    Region:
    Tidewater - Virginia and North Carolina

    Lube to make a smoker round

    Is there a bullet lube formula that creates a "smoker round"? or is a smoker considered a tracer?

    17.2 PROHIBITED PROJECTILES
    The use of multiple, separating, tracer, incendiary, or explosive projectiles is prohibited. Ramrods and cleaning rods shall not be intentionally fired as projectiles.

  2. #2
    RaiderANV's Avatar
    RaiderANV is offline
    Team:
    Palmetto Sharpshooters
    Member
    5795V
    Join Date
    Mar 2006
    Location
    Virginny & McKinney, Texas
    Posts
    2,475
    Region:
    Carolina - North Carolina and South Carolina

    Re: Lube to make a smoker round

    Some shooters only lube the inside base of their bullets with Crisco to keep the fouling soft and quite often this leaves the smoke trail.
    Never squat with yer spurs on!!!

    Pat "PJ" Kelly #5795V
    Virginny & Texas
    540-878-8024

    MAYNARDS RULE!! & starr's DROOL!
    Hence the rust. MAYNARDAE LAUS DEO!

  3. #3
    ian45662 is offline
    Team:
    Genl Wm T Sherman's Bodyguard
    Member
    12578
    Join Date
    Mar 2007
    Location
    Portsmouth Ohio
    Posts
    548
    Region:
    Midwest - Ohio, Kentucky and Indiana

    Re: Lube to make a smoker round

    I am not sure you could even see the smoke round though could you?

  4. Re: Lube to make a smoker round

    I tried lubing the base once and it made no difference. It seems you see a lot more smoke trails in the morning when its humid. I guess this dosen't help you much does it.

  5. #5
    Join Date
    Apr 2007
    Posts
    126
    Region:
    Tidewater - Virginia and North Carolina

    Re: Lube to make a smoker round

    Would a petroleum base grease or motor oil, added in with say MCM lube make a smoke trail?

  6. #6
    matt's Avatar
    matt is offline
    Team:
    Winslow Battery, 1st New York
    Member
    9775V
    Join Date
    May 2006
    Location
    Near Cabelas Hamburg Pa
    Posts
    232
    Region:
    Middle Atlantic - New York, Pennsylvania and New Jersey

    Re: Lube to make a smoker round

    Only times i have ever noticed a smoke like trail was watching others shoot from an oblique view I lube my bases of minies with crisco and have never seen a smoke trail on any of mine ive shot but have seen other teammates have what appears to be a noticeable trail. This does seem to happen in the mornings when it is cooler than say later in day during the 100 yd event.
    Matt
    Winslow's Battery 9775v

  7. #7
    Joe Plakis, 9575V is offline
    Team:
    149th Pennsylvania Volunteer Infantry
    Member
    09575v
    Join Date
    Nov 2005
    Location
    North Of Philadelphia
    Posts
    514
    Region:
    Middle Atlantic - New York, Pennsylvania and New Jersey

    Re: Lube to make a smoker round

    I would figure the rule is pretty clear that such a round would be illegal. As for the smoke trails that are visible, they are usually not visible to the shooter due to the big "puff" of smoke at the end of the barrel.

    I would figure the time wasted on figuring out how to make a legal "smoker" round could be better served practicing.
    Joe Plakis XXVIII
    Middle-Atlantic Region
    SAC
    9575V

    "Great leadership does not mean running away from reality. Sometimes the hard truths might just demoralize the company, but at other times sharing difficulties can inspire people to take action that will make the situation better." John Kotter

  8. #8
    Join Date
    Oct 2004
    Location
    Forney, Texas
    Posts
    254
    Region:
    Potomac - Virginia, Maryland and Delaware

    Re: Lube to make a smoker round

    It might be dangerous also. If something that generated smoke left some hot material in the barrel it might cause the next charge to ignite. It only takes a temperature somewhere around 500 degrees F to ignite black powder.

    David
    DAVID FRANCE

  9. #9
    RaiderANV's Avatar
    RaiderANV is offline
    Team:
    Palmetto Sharpshooters
    Member
    5795V
    Join Date
    Mar 2006
    Location
    Virginny & McKinney, Texas
    Posts
    2,475
    Region:
    Carolina - North Carolina and South Carolina

    Re: Lube to make a smoker round

    Quote Originally Posted by Joe Plakis, 9575V
    I would figure the rule is pretty clear that such a round would be illegal.
    Can you point to the exact line or word that would make the topic illegal?

    It's pretty clear it's not intended to be a tracer/incendiary round and doesn't resemble nor have even close to the principles of one neither. It just happens to leave a lil' smoke under the right conditions.
    Never squat with yer spurs on!!!

    Pat "PJ" Kelly #5795V
    Virginny & Texas
    540-878-8024

    MAYNARDS RULE!! & starr's DROOL!
    Hence the rust. MAYNARDAE LAUS DEO!

  10. #10
    Joe Plakis, 9575V is offline
    Team:
    149th Pennsylvania Volunteer Infantry
    Member
    09575v
    Join Date
    Nov 2005
    Location
    North Of Philadelphia
    Posts
    514
    Region:
    Middle Atlantic - New York, Pennsylvania and New Jersey

    Re: Lube to make a smoker round

    The basic principle I think would be covered in "tracer." The rule is written to disallow dangerous bullet types as well as ones that give a competitive advantage. The fact that you are attempting to create a bullet that smokes every time to me classifies as a tracer. Just my interpretation.


    Edited for spelling
    Joe Plakis XXVIII
    Middle-Atlantic Region
    SAC
    9575V

    "Great leadership does not mean running away from reality. Sometimes the hard truths might just demoralize the company, but at other times sharing difficulties can inspire people to take action that will make the situation better." John Kotter

Similar Threads

  1. best lube? and receipes for those that make your own
    By matt in forum Shooting Techs, Tips, & Tricks
    Replies: 22
    Last Post: 06-12-2013, 07:16 PM
  2. Lube...
    By Jim Strang in forum Small Arms
    Replies: 10
    Last Post: 10-18-2011, 02:29 PM
  3. Lube recipes...
    By CAGerringer in forum Shooting Techs, Tips, & Tricks
    Replies: 8
    Last Post: 09-20-2011, 01:59 PM
  4. Looking for someone who make cast bullets for the Parker Hal
    By Grepse in forum Wanted/For Sale Items
    Replies: 3
    Last Post: 06-19-2011, 10:11 PM
  5. Case of Pyrodex ~ Make Offer!
    By neocelt in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 03-29-2009, 02:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •