I acquired a Lyman /Zoli Zuave 2 band rifle. Tried a Lee hollow base traditional minee bullet, Dismal results. The bullets were about .575 dia as cast and would thumb start 3/4 of their length then a bit of help with a short starter. The bullets were carefully visually inspected and lubed with crisco. The bullet would seat with no resistance. My lead would pass the Thumbnail test but may not quite pure. 50- 60gr of fffg. Any suggestions? The bore should be .575 dia. My primary thing is shooting and building flintlocks so the percussion rifle is a new diversion.
Bookmarks