Results 1 to 10 of 10

Thread: .50 Cal Brass Cases-Primer Hole Problem

  1. #1
    Carl Byron is offline
    Team:
    15th Ind. Batty., OH Light Artillery
    Member
    00959
    Join Date
    Oct 2022
    Posts
    15
    Region:
    Chesapeake - Maryland, Virginia, Pennsylvania and Ohio

    .50 Cal Brass Cases-Primer Hole Problem

    Dear fellow Skirmishers, I need advice.

    I normally shoot my 2nd Model Maynard with borrowed ammunition but I came into an inheritance of new .50 cal brass cases. Problem is, the primer hole is so small less than 1% of my rounds fire. I've tested the carbine and every aspect of the firearm-it is not the Maynard, powder, ball or caps.

    My Question: Is there a size to drill the primer hole to? I know it can't be very big but it sure needs to be larger than when the cases leave the factory.

    Thanks to All in Advance.

    Carl

  2. #2
    geezmo is offline
    Team:
    120th New York Volunteer Infantry
    Member
    1761V
    Join Date
    Aug 2006
    Location
    Mid Hudson Valley
    Posts
    378
    Region:
    New England - New York, Connecticut, New Jersey and Massachusetts
    Compare yours to the borrowed cases. Drill them the same.

  3. #3
    Join Date
    Mar 2020
    Location
    Heart of Dixie
    Posts
    73
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    I bought a batch of 100 from a popular vendor about 1 year ago and had the same ignition problems. All of these seemed to have smaller flash holes. The older stock second hand/used brass works fine and have larger flash holes.

    For the new ones, I drilled them out with a #58 micro drill bit on a press. Fixed the issue.

  4. #4
    Lou Lou Lou is offline
    Team:
    Tammany Regiment, 42nd New York
    Member
    4869
    Join Date
    May 2004
    Location
    Lung Island, New Yawk
    Posts
    2,006
    Region:
    New England - New York, Connecticut, New Jersey and Massachusetts
    Just to be arbitrary, it could be the guns flash hole is too big. Not concentrating fire enough
    Lou Lou Lou Ruggiero
    Tammany Regt-42nd NYVI

  5. #5
    Carl Byron is offline
    Team:
    15th Ind. Batty., OH Light Artillery
    Member
    00959
    Join Date
    Oct 2022
    Posts
    15
    Region:
    Chesapeake - Maryland, Virginia, Pennsylvania and Ohio
    Therein lies the problem-I gave them all back

  6. #6
    Carl Byron is offline
    Team:
    15th Ind. Batty., OH Light Artillery
    Member
    00959
    Join Date
    Oct 2022
    Posts
    15
    Region:
    Chesapeake - Maryland, Virginia, Pennsylvania and Ohio
    I bought a batch of 100 from a popular vendor about 1 year ago and had the same ignition problems. All of these seemed to have smaller flash holes. The older stock second hand/used brass works fine and have larger flash holes.



    Many thanks. This is exactly what I needed. I'll pick up one of the drill bits and have them done this wekend.

    I appreciate the help.

    C

  7. #7
    John Bly is offline
    Team:
    5th Virginia Volunteer Infantry
    Member
    5109V
    Join Date
    Jan 2005
    Location
    Stephens City, VA
    Posts
    910
    Region:
    Potomac - Virginia, Maryland and Delaware
    I use a #1 center drill on mine. The tip is .047" diameter. I drill them in a lathe and the stiff body of the center drill makes sure it drills on center rather than follow an existing hole that may not be centered.

  8. #8
    RaiderANV's Avatar
    RaiderANV is offline
    Team:
    Palmetto Sharpshooters
    Member
    5795V
    Join Date
    Mar 2006
    Location
    Virginny & McKinney, Texas
    Posts
    2,495
    Region:
    Carolina - North Carolina and South Carolina
    What Cap'n Bly said......
    Never squat with yer spurs on!!!

    Pat "PJ" Kelly #5795V
    Virginny & Texas
    540-878-8024

    MAYNARDS RULE!! & starr's DROOL!
    Hence the rust. MAYNARDAE LAUS DEO!

  9. #9
    Carl Byron is offline
    Team:
    15th Ind. Batty., OH Light Artillery
    Member
    00959
    Join Date
    Oct 2022
    Posts
    15
    Region:
    Chesapeake - Maryland, Virginia, Pennsylvania and Ohio
    Quote Originally Posted by Sven205 View Post
    I bought a batch of 100 from a popular vendor about 1 year ago and had the same ignition problems. All of these seemed to have smaller flash holes. The older stock second hand/used brass works fine and have larger flash holes.

    For the new ones, I drilled them out with a #58 micro drill bit on a press. Fixed the issue.
    My bits just came in. I'm going to spend the evening drilling the brass out and take some to the range for a test run. Thanks again for the direction.

  10. #10
    John Bly is offline
    Team:
    5th Virginia Volunteer Infantry
    Member
    5109V
    Join Date
    Jan 2005
    Location
    Stephens City, VA
    Posts
    910
    Region:
    Potomac - Virginia, Maryland and Delaware
    I just went through this with a misfiring Maynard. I could get it to fire with multiply tries but that is not acceptable in a skirmish. The cases had tiny holes. I checked the Maynard out and all seemed OK. I drilled the cases out with a #1 center drill. Test firing was consistent immediate ignition every time.

Similar Threads

  1. wts - Maynard cases & .44 Mag brass
    By Rob FreemanWBR in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 08-23-2015, 12:15 AM
  2. Wts - cases & brass
    By Rob FreemanWBR in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 04-08-2015, 12:16 PM
  3. Brass Burnside Cases
    By B-Davis in forum Wanted/For Sale Items
    Replies: 1
    Last Post: 03-16-2014, 11:50 AM
  4. Maynard Primer Hole
    By kbc in forum Shooting Techs, Tips, & Tricks
    Replies: 5
    Last Post: 09-03-2011, 12:19 AM
  5. Brass Smith Cases
    By Walt Magee in forum Wanted/For Sale Items
    Replies: 5
    Last Post: 05-27-2009, 07:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •