Results 1 to 5 of 5

Thread: Musket cleaning

  1. #1
    Muley Gil is offline
    Team:
    34th Battalion Virginia Cavalry
    Member
    3020V
    Join Date
    May 2004
    Location
    Southwest Virginia
    Posts
    1,682
    Region:
    New England - New York, Connecticut, New Jersey and Massachusetts

    Musket cleaning

    I try to clean my skirmish guns on Monday after a shoot. However, that plan didn't work out this spring. I cleaned my Smith carbine (repo) this past Sunday, but didn't clean my Parker-Hale 1858 until yesterday.

    First, I used the breach plug scraper and dumped out some carbon. I then brushed the bore and dumped a bit more carbon. I followed that with a wet brush soaked with Ballistol (cut 50/50 with water). One wet patch and two dry patches and the bore was clean. I remove the nipple and let it soak. After cleaning the nipple, the fire channel and the outside, I was basically done. I lube the bore with Bore Butter and put a little on the nipple threads as well. It goes into the safe, muzzle down.

    There was no rust in or on the musket, even after 10 days, being stored in my workshop. A number of years back, I went a month without cleaning and still had no rust. I DON'T recommend that at all!

    I'm sure other shooters will totally disagree with my cleaning methods and my use of the above solvents and preservatives.

    This works for me.
    Gil Davis Tercenio
    # 3020V
    34th Battalion, Virginia Cavalry
    Great, great grandson of Cpl Elijah S Davis, Co I, 6th Alabama Inf CSA

  2. #2
    Join Date
    Jan 2009
    Location
    Huntsville
    Posts
    3,739
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    Likewise, I have delayed cleaning a few times. Now, when I leave the shooting event, I usually do a quick "field clean" of the bore so that it's not encased in cement. But a couple of times I have not been able to do that.

    I think as long as you get home and get the gun out of its case and keep it in an air-conditioned environment, the residue dries out and doesn't actively work on the steel.

    Of course, it's not optimal care by any means.

    Steve
    Steve Sheldon
    Commander
    4th Louisiana Delta Rifles
    NRA Certified Muzzleloading Instructor

  3. #3
    PoorJack is offline
    Team:
    Palmetto Sharpshooters
    Member
    NA
    Join Date
    Apr 2015
    Location
    NC
    Posts
    364
    Region:
    Carolina - North Carolina and South Carolina
    I've noticed the same thing. In a dry environment, you can let them go a couple days before serious cleaning. We've had to let the muskets we use when working with the Scouts sit a day or two and they cleaned up just fine with no damage. You won't get away with that with Pyrodex.

    I'm with Steve on this one. A quick "field clean" with Ballistol and detail clean at home. No damage noted in years.
    "A man can never have too much red wine, too many books, or too much ammunition"
    Rudyard Kipling


    YadkinValleyRangers@gmail.com
    NRA Muzzleloading Instructor

  4. #4
    Join Date
    Jan 2009
    Location
    Huntsville
    Posts
    3,739
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    Yeah, all this goes out the window with Pyrodex. That stuff will eat up a gun overnight.

    Steve
    Steve Sheldon
    Commander
    4th Louisiana Delta Rifles
    NRA Certified Muzzleloading Instructor

  5. #5
    Rebel Dave is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    06273
    Join Date
    Mar 2008
    Location
    Burlington, Wisconsin
    Posts
    332
    Region:
    Visitor
    I think all those fake blk powders will corrode our guns pretty fast.
    I give my muskets a field clean, till I get home. Then the BBLs go in a bcket of water, and Dawn mix, dry them, then ballistol.

    Dave
    Past Member 14th Mississippi

Similar Threads

  1. Cleaning out the shop . . .
    By Chris Sweeney in forum Wanted/For Sale Items
    Replies: 12
    Last Post: 01-04-2019, 09:04 AM
  2. Cleaning
    By Kenneth L. Walters in forum Small Arms
    Replies: 3
    Last Post: 07-31-2014, 03:39 AM
  3. Cleaning a musket stock
    By B-Davis in forum Shooting Techs, Tips, & Tricks
    Replies: 5
    Last Post: 02-09-2014, 11:14 AM
  4. Cleaning your musket tubes
    By Joe Plakis, 9575V in forum Shooting Techs, Tips, & Tricks
    Replies: 11
    Last Post: 01-04-2011, 03:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •