Hopefully I understand what you're asking, but if I understand it right your answer is pretty simple...
The nose cap screw comes down (The head of the screw faces the barrel), and goes through a hole in the wood at the nose into the metal nosecap. it will be threaded to receive it. You will need to countersink the hole of the screw on the side facing the barrel so the head of the screw doesn't contact the barrel. If you're inletting a stock, you'll need to do a good bit of fitting on the wood to get the nosecap to fit in the wood. The place to mount the nosecap will be mentioned in the spec sheet for the gun you're trying to build, if you're inletting.
John Westenberger
Co. B. 1st PA Cav.
Bookmarks