Tang screw for JRA Richmond Carbine

**Fire18WFD** · 03-26-2023

Which Sutler would have a Tang screw for a James River Armory Richmond Carbine?

**Joe Plakis, 9575V** · 03-27-2023

That would be a Euroarms screw....

**Fire18WFD** · 03-27-2023

Originally Posted by Joe Plakis, 9575V

That would be a Euroarms screw....

Unfortunately it is SAE thread.

**Maillemaker** · 03-28-2023

I can make a drawing of the screw so you can have one made.

Steve

**Fire18WFD** · 03-28-2023

Originally Posted by Maillemaker

I can make a drawing of the screw so you can have one made.

Steve

I have the original screw it?s broken.

**mike davenport** · 03-28-2023

You could silver solder or braze it back together? you could also turn down a larger bolt/ screw to make the tang screw if you dont have access to a machinist. just some thougths- not trying to be funny or snide
md

**Maillemaker** · 03-31-2023

I would take the screw to a local machine shop and have them fab you a new one.

**John Bly** · 03-31-2023

Most local machine shops have a minimum charge which is much more than one screw is worth. Best to find a home shop machinist who will do the job for much less.