Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: WTB-M.G.O. mould

  1. #1
    Join Date
    Oct 2006
    Location
    West Augusta,VA
    Posts
    122
    Region:
    Central Virginia - Virginia and North Carolina

    WTB-M.G.O. mould

    I looking for a Mike Owsiak .50 cal. Maynard mould marked .517 or .518. PM me if you have on you would like to part with.

    Thank you,
    Joe Heatwole
    Unit Commander
    11th Virginia Cavalry

  2. #2
    mike owsiak is offline
    Team:
    Union Valley Volunteers
    Member
    4867V
    Join Date
    Sep 2006
    Location
    Marton,N.J.
    Posts
    56
    Region:
    Middle Atlantic - New York, Pennsylvania and New Jersey

    Mould

    Joe, I haven't made any moulds in years, and not going to restock material at this time...........MIKE

  3. #3
    Join Date
    Oct 2006
    Location
    West Augusta,VA
    Posts
    122
    Region:
    Central Virginia - Virginia and North Carolina

    Mould

    Hello Mike, Thanks for the response. I would have bought a new mould if available, but was hoping maybe someone had a used one they would be willing to part with. I bought a nice 2nd model Maynard from a team mate and he said this is the mould he used with good results. Still looking.
    Joe Heatwole
    Unit Commander
    11th Virginia Cavalry

  4. #4
    MPatton is offline
    Team:
    2nd New Jersey Cavalry, Co. K
    Member
    5594
    Join Date
    Mar 2020
    Posts
    20
    Region:
    Middle Atlantic - New York, Pennsylvania and New Jersey

    MGO mould

    Mike
    I have a few of your 50 cal moulds that were my dads. I?ve had them them ever since he passed away but they are not in very good condition. Would you be interested in refacing and recutting the cavity? I would like to make them serviceable again.
    Matt

  5. #5
    Join Date
    Oct 2006
    Location
    West Augusta,VA
    Posts
    122
    Region:
    Central Virginia - Virginia and North Carolina

    Mould

    Quote Originally Posted by MPatton View Post
    Mike
    I have a few of your 50 cal moulds that were my dads. I?ve had them them ever since he passed away but they are not in very good condition. Would you be interested in refacing and recutting the cavity? I would like to make them serviceable again.
    Matt
    Hello. Would you happen to have one marked .517 or .518? If you do, would you consider parting with it and how bad are they damaged?

    Thank you,
    Joe Heatwole
    Unit Commander
    11th Virginia Cavalry

  6. #6
    Join Date
    Mar 2008
    Location
    Lynchburg, Va
    Posts
    374
    Region:
    Central Virginia - Virginia and North Carolina
    Joe,

    If you can't find anything else, I've got one of the ones made (and marked) by Larry Romano and intended for his Maynard repros. I believe I also still have the 6 cavity Lee mould I bought from Lodgewood and never got around to using. I'm still using that little single cavity 515139 Ideal mould I got when I bought my First Model Romano and have never seen reason to change!

    Your Amphibian Friend
    Charlie Shaeff
    1st Valley Rangers
    N-SSA # 12345

  7. #7
    RaiderANV's Avatar
    RaiderANV is offline
    Team:
    Palmetto Sharpshooters
    Member
    5795V
    Join Date
    Mar 2006
    Location
    Virginny & McKinney, Texas
    Posts
    2,472
    Region:
    Carolina - North Carolina and South Carolina
    Quote Originally Posted by RangerFrog View Post
    Joe,

    If you can't find anything else, I've got one of the ones made (and marked) by Larry Romano and intended for his Maynard repros. I believe I also still have the 6 cavity Lee mould I bought from Lodgewood and never got around to using. I'm still using that little single cavity 515139 Ideal mould I got when I bought my First Model Romano and have never seen reason to change!

    Your Amphibian Friend

    Message sent my amphibian friend.
    Never squat with yer spurs on!!!

    Pat "PJ" Kelly #5795V
    Virginny & Texas
    540-878-8024

    MAYNARDS RULE!! & starr's DROOL!
    Hence the rust. MAYNARDAE LAUS DEO!

  8. #8
    MPatton is offline
    Team:
    2nd New Jersey Cavalry, Co. K
    Member
    5594
    Join Date
    Mar 2020
    Posts
    20
    Region:
    Middle Atlantic - New York, Pennsylvania and New Jersey
    Joe,
    I spoke to Mike a couple days ago and I?m going to take my moulds to him in the near future to recut them. I?m really not looking to let go of them. If I decide not to keep both of them I?ll let you know. In the meantime keep searching I?m sure one will pop up.
    Matt, 2nd NJ Cav.

  9. #9
    Join Date
    Oct 2006
    Location
    West Augusta,VA
    Posts
    122
    Region:
    Central Virginia - Virginia and North Carolina

    Mould

    Matt,
    Thank you for the reply. I'm still looking if anyone has one they are willing to part with. I understand they are very good moulds.
    Joe Heatwole
    Unit Commander
    11th Virginia Cavalry

  10. #10
    Join Date
    Oct 2006
    Location
    West Augusta,VA
    Posts
    122
    Region:
    Central Virginia - Virginia and North Carolina

    Mould

    Charlie,
    Sent you a pm.
    Joe Heatwole
    Unit Commander
    11th Virginia Cavalry

Similar Threads

  1. Rapine Mould or other Mould
    By Greg Delk in forum Wanted/For Sale Items
    Replies: 1
    Last Post: 08-10-2017, 03:07 PM
  2. WTT: Rapine .685" round ball mould for a .675" RB mould
    By Jim Wimbish, 10395 in forum Wanted/For Sale Items
    Replies: 1
    Last Post: 09-08-2014, 01:19 PM
  3. WTB Smith/Maynard mould(Mould found)
    By John Lahman 11013 in forum Wanted/For Sale Items
    Replies: 2
    Last Post: 02-03-2010, 11:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •