Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Got a bit of a lemon here - Colt Signature Series 2-band.

  1. #1
    Join Date
    Jan 2009
    Location
    Huntsville
    Posts
    3,817
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas

    Got a bit of a lemon here - Colt Signature Series 2-band.

    So a few months ago I picked up a Colt Signature Series 2-band. I've been reading about them and they look like they were sub-quality guns. This one sure is.

    There are mis-machined parts of the stock itself. There is a narrowing of the stock on one side of the barrel in one place, and and the "picture frame" on the opposite side of the lock plate is has a "corner" in it where I guess the tooling did not follow the contour smoothly. The trigger bound up in the trigger plate (I have fixed that with some careful filing) as there was a burr in the trigger plate itself plus the trigger had a bow in it that was rubbing the slot in the trigger plate.

    I had heard that the lock internals were notoriously soft, so the first thing I did was carburize and heat treat the internals. They seem to be holding up but the trigger pull is hard and creepy.

    Took it to the range today for the first time. Actually got a really good group with the RCBS Hodgdon bullet sized to .578 with 48 grains 3F Goex. Bore seems to be about .580. I would have sized larger but my dies only go up to .578.

    Put a bore scope down the bore and I can see that the rifling is boogered at he breech. Worse, there are threads exposed beyond the breech face which is a great place for fouling to accumulate for a possible cook-off.

    I'm not sure what to do with this gun. I wouldn't feel good selling it on. I paid $956 for it, plus about $100 in taxes, plus shipping. I'm thinking "In for a penny, in for a pound." I'm thinking of getting the barrel lined by Hoyt. Not sure what to do about the lock. Does anyone know if an original or reproduction Springfield lock will fit?

    Last edited by Maillemaker; 06-20-2022 at 02:59 AM.
    Steve Sheldon
    Commander
    4th Louisiana Delta Rifles
    NRA Certified Muzzleloading Instructor

  2. #2
    P.Altland is offline
    Team:
    21st Virginia Infantry - Maryland Guard
    Member
    12085V
    Join Date
    Mar 2008
    Location
    York, PA
    Posts
    507
    Region:
    Chesapeake - Maryland, Virginia, Pennsylvania and Ohio
    Springfield locks are not interchangeable with a Colt Special Model.
    Paul Altland
    21st Va. Md Guard Co. B

  3. #3
    Join Date
    Jan 2009
    Location
    Huntsville
    Posts
    3,817
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    Found this thread on this gun:

    https://www.n-ssa.net/vbforum/showth...1-reproduction

    Looks like the threads going to deep into the bore was a common problem.

    Steve
    Steve Sheldon
    Commander
    4th Louisiana Delta Rifles
    NRA Certified Muzzleloading Instructor

  4. #4
    William H. Shuey is offline
    Team:
    1st Maine Heavy Artillery
    Member
    2558V
    Join Date
    May 2004
    Location
    Baltimore, Maryland
    Posts
    348
    Region:
    Chesapeake - Maryland, Virginia, Pennsylvania and Ohio

    I bought one of their Amoskeag repros many moons ago....

    After two or three cook-offs and accompanying singed fingers I had Mr. Hoyt do his magic and it has served me fairly well since.

    Bill Shuey
    1st Maine Heavy Artillery

  5. #5
    Carolina Reb is offline
    Team:
    2nd South Carolina, Co I, Palmetto Guard
    Member
    5794V
    Join Date
    Sep 2013
    Posts
    376
    Region:
    Carolina - North Carolina and South Carolina
    The lock is an Enfield behind the plate. I have heard that Euroarms parts will fit, but have no direct experience.

  6. #6
    Join Date
    Jan 2009
    Location
    Huntsville
    Posts
    3,817
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    I replaced my Euroarms P53 lock tumber and sear with the CNC replacement from Lodgewood.

    I tried putting them in the Colt last night and they do not fit. The square hammer shaft is much to small for the hammer.

    Perhaps Armisport P53 parts will work.

    Steve
    Steve Sheldon
    Commander
    4th Louisiana Delta Rifles
    NRA Certified Muzzleloading Instructor

  7. #7
    MR. GADGET's Avatar
    MR. GADGET is offline Moderator
    Team:
    Rowan Artillery
    Member
    11873V
    Join Date
    Apr 2006
    Location
    Raleigh NC
    Posts
    1,519
    Region:
    Tidewater - Virginia and North Carolina
    Always liked the looks of those rifles, just had a funny feel about them.
    When you could get them on suckers row I looked at several. When I ran a rod down the barrel you could feel the threads.
    I did not walk away, I ran.

    Those guns are on my list to get one day. When they are free!

    I would ask Lodgewood if they can re work it. They may be able to build some custom parts that would later help the rest that are in your shoes.
    We had a few on our team shooting them in the past. Had cool off also.
    MR. GADGET
    NRA LIFE BENEFACTOR MEMBER
    Rowan Artillery
    N-SSA National Provost Guard

    Just remember!
    When a pot needs stirring, someone needs to do it...

  8. #8
    John Bly is offline
    Team:
    5th Virginia Volunteer Infantry
    Member
    5109V
    Join Date
    Jan 2005
    Location
    Stephens City, VA
    Posts
    899
    Region:
    Potomac - Virginia, Maryland and Delaware
    Bob Hoyt is the remedy for the barrel issue. If you hardened the lock parts you should be able to get the lock tuned to a good let-off that will last a long time.

  9. #9
    Join Date
    Jan 2009
    Location
    Huntsville
    Posts
    3,817
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    I took the gun apart last night and discovered that there was a burr in the trigger slot in the trigger plate. Also, the tail of the trigger was a bit bowed, which made it rub in the slot. A bit of file work and that problem is fixed. I reassembled and the trigger feels a lot better now. My Lyman trigger pull gauge says I'm pulling an average of 6 pounds 10 ounces. I think I'll put a hundred rounds through it and see where it ends up.

    Have to send the barrel off to Hoyt though.
    Steve Sheldon
    Commander
    4th Louisiana Delta Rifles
    NRA Certified Muzzleloading Instructor

  10. #10
    Join Date
    Nov 2018
    Location
    Marion, Alabama
    Posts
    91
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    Drat!!! I have a spare complete Armi-Sport Enfield lock if you want to try it. Call or text me. jh

Similar Threads

  1. For sale:Colt 3 band signature series
    By B-Davis in forum Wanted/For Sale Items
    Replies: 3
    Last Post: 06-22-2013, 08:39 AM
  2. 3-band Colt Signature Series
    By B-Davis in forum Shooting Techs, Tips, & Tricks
    Replies: 11
    Last Post: 05-26-2013, 02:03 PM
  3. F/S Colt Signature series
    By mike owsiak in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 09-26-2012, 06:15 PM
  4. Colt Signature Series
    By khill in forum Small Arms
    Replies: 15
    Last Post: 02-14-2011, 07:15 PM
  5. Colt Signature Series Accessories Box for the 36 Colt Pistol
    By sutlerjim in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 03-09-2009, 08:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •