If someone is actively cutting these down, please
PM me so we can talk ... thanks
If someone is actively cutting these down, please
PM me so we can talk ... thanks
N-SSA Member since 1974
Hello, Bruce:
Have done this to make 56-50 Spencer cases using Starline 50-70/90 new brass.
Works fine, with NO reaming and .016" wall thickness. I use CH4D dies w .511" expander for .5115" sized bullets that are .0005" over groove sized bullets.
Cases need salt bath annealing after each shot for max case life.
Will call this afternoon. Smiles.
Kevin Tinny
It's easy to trim and really fast to do. See video.https://cloud.tapatalk.com/s/6089c21e...004559_281.mp4
Sent from my SM-N981U using Tapatalk
Here is a short video of me cutting down 50-70 using a Harbor Freight mini chop saw and fixture I made to cut them consistently.
https://youtu.be/7unEiiPN860
This is a fast and easy way to trim the cases. I have done 120 of the in about hour or two.https://cloud.tapatalk.com/s/6089d55b...004559_281.mp4
Sent from my SM-N981U using Tapatalk
Video did not load
Sent from my SM-N981U using Tapatalk
Bookmarks