Looking for a hollow based 50 call bullet mold.
Thanks, Randall
Looking for a hollow based 50 call bullet mold.
Thanks, Randall
Randal,
Steven has one that casts a semi wad cutter, with adjustable depth hollow base. RCBS I think
520...
Mike
Mike 'Bootsie' Bodner
Palmetto Sharpshooter's, Commander
9996V
Maybe .520 would work sized down.
Last edited by Smokepole50; 05-23-2020 at 01:19 AM.
Is there anyone out there nowadays that can do a good job enlarging the bands' diameter in a mold?
A Lyman #445599 would be a prime candidate if someone can do the work.
By the way, if you're using it in a venue where paper patching is acceptable, taking a #445599 out to a straight sided configuration should be easy and relatively inexpensive. I used that in a shallow groove green mountain barrel long time ago. Reminds me, I want to have that adjustable length plug make a deeper hollow, longer bullet and thinner skirt so I don't have to jack up the powder charge.
Last edited by hobbler; 05-23-2020 at 05:03 AM.
I have a .520 RCBS hollow base N-SSA mold & it works very well.
Joe Plakis Jr
PM sent about mold
Bookmarks