Does anyone make a rear sight ladder with an uncut slot similar to what is available for the Smith Carbine. I would prefer to cut my own slot in it.
Thanks in advance
Does anyone make a rear sight ladder with an uncut slot similar to what is available for the Smith Carbine. I would prefer to cut my own slot in it.
Thanks in advance
Daryl Noonan
NSSA # 14002
12th Regiment US Regular Infantry
"You see in this world there are two types of people my friend. Those with loaded guns, and those who dig. You dig!!"
Daryl - You can add a piece to the back of the sighting face of the sight on the ladder as per the Rules:
Section 19.9.1 (SIGHTS (HAND AND SHOULDER ARMS)
(j) Long‐range sights may be modified only by the addition of metal to the vertical height and the thickness of the sighting notch area of the ladder or slide. The added metal shall not exceed the width of the original area to which it is attached, it shall not increase the original thickness by more than 1/16‐inch (.0625?) and the total height of the notch or peep area shall not exceed 1/2‐inch (.500?).
Bookmarks