Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: WTB; Pedersoli Sharps breech block hinge pin

  1. #1
    keweenaw is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Dec 2016
    Posts
    302
    Region:
    Visitor

    WTB; Pedersoli Sharps breech block hinge pin

    This is for their M1859 percussion 54 cal model. I presume this is common to the berdan version, and maybe the cartridge versions as well?

    Lost the pin ( I know, i will probably find the lost one after I buy a new one!!) somewhere along the line. Dont want to have to spend high dollar Pedersoli prices if I dont have to.

    Anyone have one?

    Thanks

  2. #2
    Yakiman is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Sep 2017
    Posts
    148
    Region:
    Visitor
    VTI would have it, so would Lodgewood, S&S, maybe Dixie, Flintlocks, etc. and there's a firm in Texas specializing in Pedersoli parts - can't think of the name.
    Last edited by Yakiman; 10-18-2019 at 02:55 PM.

  3. #3
    keweenaw is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Dec 2016
    Posts
    302
    Region:
    Visitor

    parts

    Quote Originally Posted by Yakiman View Post
    VTI would have it, so would Lodgewood, S&S, maybe Dixie, Flintlocks, etc. and there's a firm in Texas specializing in Pedersoli parts - can't think of the name.
    Thanks. Looked at them and they are pricey. Was wondering if someone might have one I could get used. New ones seem to start at 35 and up from there.

  4. #4
    Yakiman is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Sep 2017
    Posts
    148
    Region:
    Visitor
    I'd check with Charlie Hahn

  5. #5
    bobanderson is offline
    Team:
    1st Michigan Infantry
    Member
    12291
    Join Date
    Aug 2008
    Location
    Howell, MI
    Posts
    831
    Region:
    Northwest Territory - Michigan, Ohio and Indiana

    Taylors and Co in Winchester

    Bob Anderson
    Ordnance Sergeant
    Company C, 1st Michigan Volunteer Infantry
    Small Arms Committee

    "I won't be wronged. I won't be insulted. I won't be laid a hand on.
    I don't do these things to other people, and I require the same from them."
    - John Wayne in "The Shootist", 1976

  6. #6
    keweenaw is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Dec 2016
    Posts
    302
    Region:
    Visitor

    response from taylors


    Hello, FYI, they only handle parts for armisport/Chiappi sharps guns. Does anyone know if the hinge pin would be the same in size and fit between armisport and pedersoli sharps? Has anyone tried this? Thanks

  7. #7
    Lou Lou Lou is offline
    Team:
    Tammany Regiment, 42nd New York
    Member
    4869
    Join Date
    May 2004
    Location
    Lung Island, New Yawk
    Posts
    1,965
    Region:
    New England - New York, Connecticut, New Jersey and Massachusetts
    Might be something one of our local machinists might want to supply.
    Lou Lou Lou Ruggiero
    Tammany Regt-42nd NYVI

  8. #8
    Yakiman is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Sep 2017
    Posts
    148
    Region:
    Visitor
    Did you try IFG (Italian Firearms Group)? They're also a distributor and parts supplier. Give them a call at 1-800-450-1852. The code number for the part you need is: 0800000214.

  9. #9
    keweenaw is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Dec 2016
    Posts
    302
    Region:
    Visitor
    Quote Originally Posted by Yakiman View Post
    Did you try IFG (Italian Firearms Group)? They're also a distributor and parts supplier. Give them a call at 1-800-450-1852. The code number for the part you need is: 0800000214.

    Asked IFG and they do not have in stock, but price is around 50 bucks. Price is 58 bucks at VTI. The ones at Taylor are only about 20 bucks. But, I dont know if they will fit the pedersoli.

  10. #10
    Yakiman is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Sep 2017
    Posts
    148
    Region:
    Visitor
    Order it from Dixie for $25 and if it doesn't fit, send it back.

Similar Threads

  1. Pedersoli Sharps Breech issue
    By Charlie Hahn in forum Small Arms
    Replies: 2
    Last Post: 04-15-2019, 10:55 AM
  2. Got my Sharps breech block back from some more Larry Flees magic...
    By Maillemaker in forum Shooting Techs, Tips, & Tricks
    Replies: 4
    Last Post: 07-18-2017, 08:59 PM
  3. Pedersolis new sharps Breech Block
    By johnefelts in forum Small Arms
    Replies: 12
    Last Post: 12-13-2012, 09:10 AM
  4. Garret Sharps Carbine hinge pin question
    By Bruce Cobb 1723V in forum Small Arms
    Replies: 4
    Last Post: 02-02-2010, 08:27 AM
  5. WTB 1859-63 Sharps percussion Breech Block and hammer
    By tony 1st regt in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 12-21-2008, 02:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •