Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Where to get paint for artillery carriage?

  1. #1
    Tim Lyne is offline
    Team:
    Knap's Battery, Pennsylvania Artillery
    Member
    2952V
    Join Date
    May 2004
    Location
    Lisburn, Pa.
    Posts
    267
    Region:
    Allegheny - Maryland, Pennsylvania, West Virginia and Virginia

    Where to get paint for artillery carriage?

    Just finished building a 1st model Prairie Carriage and need to know where I can order the right paint. Help would be much appreciated!
    Tim Lyne
    Knap's Batt.
    #2952V

  2. #2
    Des is offline
    Team:
    1st Regiment Virginia Volunteers
    Member
    12385
    Join Date
    Mar 2008
    Location
    Yorktown, Virginia
    Posts
    202
    Region:
    Tidewater - Virginia and North Carolina

    Artillery paint

    I get mine from Sherwin Williams. If you are interested I can get the paint number tomorrow. It was a blended paint to match the paint I was using but was discontinued by another manufacturer.
    Des Donnelly
    1st Regiment Virginia Volunteers
    12385

  3. #3
    Tim Lyne is offline
    Team:
    Knap's Battery, Pennsylvania Artillery
    Member
    2952V
    Join Date
    May 2004
    Location
    Lisburn, Pa.
    Posts
    267
    Region:
    Allegheny - Maryland, Pennsylvania, West Virginia and Virginia
    I'd be thankful for that info! Exactly what I need Des, thanks!
    Tim Lyne
    Knap's Batt.
    #2952V

  4. #4
    Des is offline
    Team:
    1st Regiment Virginia Volunteers
    Member
    12385
    Join Date
    Mar 2008
    Location
    Yorktown, Virginia
    Posts
    202
    Region:
    Tidewater - Virginia and North Carolina

    paint

    email with specs sent
    Des Donnelly
    1st Regiment Virginia Volunteers
    12385

  5. #5
    Join Date
    Jun 2007
    Posts
    389
    Region:
    Tidewater - Virginia and North Carolina
    What type of barrel are you gonna put on you new carriage?

  6. #6
    Tim Lyne is offline
    Team:
    Knap's Battery, Pennsylvania Artillery
    Member
    2952V
    Join Date
    May 2004
    Location
    Lisburn, Pa.
    Posts
    267
    Region:
    Allegheny - Maryland, Pennsylvania, West Virginia and Virginia
    I've got a Jamie West Confederate Mountain Rifle tube to put on it. Seemed like a good choice to get Knap's back in Artillery. Just picked up the paint this morning. If it weren't raining cats and dogs right now I'd probably have the primer on it. By the way, "Kem Bond HS" was highly recommended by a professional house painter.

    I really enjoyed building this and am blessed to have the equipment to do the work; shop size table saw (with a great fence), 14"x6' E.B.M. Hendey lathe, Wells-Index Milling machine, and the Queen of my shop, an 1890 H.B. Smith 36" wheel band saw. Takes an 18' blade. Replaced the babbit bearings with oilite bronze, re-laminated the wheels with Ash, new guides, etc. Cuts straight as an arrow. With a 1-1/2" 2 t.p.i. blade, it slices through a 12" thick white oak beam like a laser. 16"X36" throat on the bugger! I've cut miles of guitar wood with this. My team is sick of hearing me brag about it. And no, I'm not compensating for anything by owning this and/or bragging about it...

    I've taken a bunch of pictures of the build and machinery, thinking I might write something up for the Skirmish Line sometime. Building this gave me a tremendous amount of respect for the folks who originally engineered carriages in use during the Civil War. They knew exactly what they were doing. It's a humbling thing and should be for anyone with any sense of history.

    Tim Lyne
    Knap's Batt.

  7. #7
    RaiderANV's Avatar
    RaiderANV is online now
    Team:
    Palmetto Sharpshooters
    Member
    5795V
    Join Date
    Mar 2006
    Location
    Virginny & McKinney, Texas
    Posts
    2,472
    Region:
    Carolina - North Carolina and South Carolina
    Has Lefty signed off on the project with his Blessings yet??
    Never squat with yer spurs on!!!

    Pat "PJ" Kelly #5795V
    Virginny & Texas
    540-878-8024

    MAYNARDS RULE!! & starr's DROOL!
    Hence the rust. MAYNARDAE LAUS DEO!

  8. #8
    Jim Brady Knap's Battery is offline
    Team:
    Knap's Battery, Pennsylvania Artillery
    Member
    2249v
    Join Date
    May 2004
    Location
    Gettysburg, Pa.
    Posts
    637
    Region:
    Allegheny - Maryland, Pennsylvania, West Virginia and Virginia
    Tim wrote, "I really enjoyed building this and am blessed to have the equipment to do the work; shop size table saw (with a great fence), 14"x6' E.B.M. Hendey lathe, Wells-Index Milling machine, and the Queen of my shop, an 1890 H.B. Smith 36" wheel band saw. Takes an 18' blade. Replaced the babbit bearings with oilite bronze, re-laminated the wheels with Ash, new guides, etc...." Tim forgot to add, And a door into the kitchen that I forget to close when creating vast quantities of fine saw dust.
    Last edited by Jim Brady Knap's Battery; 06-08-2016 at 01:08 PM.
    Jim Brady
    2249V
    Knap's Battery


    CUM CATAPULTAE PROSCRIBEANTUR TUM SOLI PROSCRIPTI CATAPULTAS HABEANT

  9. #9
    Tim Lyne is offline
    Team:
    Knap's Battery, Pennsylvania Artillery
    Member
    2952V
    Join Date
    May 2004
    Location
    Lisburn, Pa.
    Posts
    267
    Region:
    Allegheny - Maryland, Pennsylvania, West Virginia and Virginia
    A story of marital tolerance and forgiveness....and jewelry.
    Yes, thank you oh-so-much for bringing up that little foot note to this build. My "shop" is what my wife used to call the "garage", which is directly connected to our dining room by a door that seems to work just fine. My bandsaw is juuust about a foot away from this door. After an exhilarating all-morning session slicing and dicing the trail on the saw, I turned and realized with equally exhilarating horror and dread that at some point someone or something had neglected to close this door after getting a cup of coffee. I'm not saying it wasn't me, I'm just saying it could have been anyone else.
    **All of this could have been avoided if I had taken a minute to hook up my dust system or even just put a garbage can under the dust chute, but no, I couldn't be bothered; after all, the team needed this gun done now! So, in a very real sense and as I explained it to my tolerant and loving wife, this was really all their fault.
    "Can't be that bad" I said to myself...until I looked in and saw the dust devils making their death swirls as they settled an inch deep around chair and table legs... and stove top and pantry shelves and computer desk...you get the idea.
    I immediately called the team thinking that since this was truly all their fault, they'd arrive to help, but no. "I'd like to help", Jim Brady said, "but I've got a hemorrhoid the size, color and texture of a concord grape and I can't possibly help." I spent six hours on the phone trying to get team members here for an immediate emergency clean up, but no, everyone has some sort of medical procedure, a Trump/Clinton fundraiser to attend or a funeral to go to.

    Anyway, I cleaned it up as best I could. I also reminded my wife that we have white oak flooring in our dining room and it appeared to me that the white oak sawdust I made was just trying to make a connection and really, who are we to interrupt that? Matter of fact, being a culturally sensitive guy, I was a little indignant that she was so upset about this.

    It's all okay now though, thanks for asking.

  10. #10
    Ron/The Old Reb Guest
    I take it that you are now outside sleeping with the dog.

Similar Threads

  1. "wipe-able" orange front sight paint?????
    By Rob FreemanWBR in forum Shooting Techs, Tips, & Tricks
    Replies: 4
    Last Post: 04-30-2013, 05:48 PM
  2. WTB: Southron "gun carriage"
    By fullertc in forum Wanted/For Sale Items
    Replies: 1
    Last Post: 01-21-2013, 05:34 PM
  3. 12pdr First Model Prairie Carriage w/limber for sale
    By RY in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 12-26-2012, 01:06 PM
  4. Replies: 5
    Last Post: 01-02-2012, 07:16 PM
  5. 36in wheeled carriage for sale
    By rampa_room_artillery in forum Wanted/For Sale Items
    Replies: 2
    Last Post: 02-07-2010, 03:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •