I have been shooting a 2nd Model Maynard in the NSSA since 1984. I shoot a 400 grain Moose Smith/Maynard bullet (soft lead) in full capacity brass cases. I use 35 grains of GOEX 3F. This combination allows the bullet to sit on top of the powder. When I push the cartridge into the chamber and close the breech, the top band of the bullet is forced into the rifling. The bullet doesn't have to jump from the cartridge to the rifling. This combination has worked very well for me. One thing to keep in mind is that you should listen to the advice of other Maynard shooters to hear what works best for them, that way you will have some ideas on what you may want to do with your Maynard. Best of luck.
Mike Santarelli 03635V, Adjutant
Member since 1979
Co. B, 1st Pennsylvania Cavalry, #229
National Inspector General
Small Arms Committee
Bookmarks