Results 1 to 8 of 8

Thread: For sale: Peep sight drill guide

  1. #1
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    102
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas

    For sale: Peep sight drill guide

    Sold pending funds.

    Offered for sale is a peep sight drill guide made by Tennessee Bullet Moulds, the company of my good friend George Gompf (Forest Escort Team, Deep South Region).


    This device clamps to the rear sight base of your musket or carbine. It has windage and elevation adjustments which you use to sight in with your weapon. Once you are happy with the peep sight location, you re-install the rear leaf and transfer the peep location from the hardened eye piece on the drill guide to the leaf and drill the peep sight hole in the leaf. Works perfectly.

    Here is a link to some photos of the drill guide which I uploaded to photo bucket:
    http://s1379.photobucket.com/user/tmont1950/library/Peep%20sight%20tool

    I am offering for sale as I have made the peeps I need. It is in excellent condition, used only two times.

    Retail was $100 when I purchased.
    Will sell for $60 which includes shipping to the lower 48.

    Thanks in advance.
    Tom


    Attached Images Attached Images   
    Last edited by tmont; 07-22-2015 at 12:41 PM.
    Tom Montgomery, 14th MS

  2. #2
    John Holland is offline Moderator
    Team:
    44th NY Volunteer Infantry
    Member
    00973V
    Join Date
    Nov 2004
    Posts
    2,878
    Region:
    Northeast- New York
    Tom - I will purchase your drill guide. Contact me direct please for confirming details: jh44ny(at)Verizon.net.

    Thank you,
    John Holland

  3. #3
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    102
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    Quote Originally Posted by John Holland View Post
    Tom - I will purchase your drill guide. Contact me direct please for confirming details: jh44ny(at)Verizon.net.

    Thank you,
    John Holland
    Morning, John.
    You got it, my friend!
    Will send you an email.
    Best regards.
    Tom
    Tom Montgomery, 14th MS

  4. #4
    JimSmith is offline
    Team:
    149th NY Volunteer Infantry
    Member
    10832
    Join Date
    May 2004
    Location
    Ithaca, NY
    Posts
    64
    Region:
    Northeast- New York

    Red face Excellent!

    Now I know who to borrow it from.

    Smitty
    Jim Smith, 10832
    149thNYVI

  5. #5
    Michael Bodner's Avatar
    Michael Bodner is offline
    Team:
    8th Regiment Virginia Volunteers
    Member
    9996V
    Join Date
    Jun 2004
    Location
    Rock Hill, South Carolina
    Posts
    1,045
    Region:
    Potomac - Virginia, Maryland and Delaware
    I figured out how to use this tool for my 50-yd sight - But how do you use it for the 100-yd (tall flip up)??
    Mike 'Bootsie' Bodner
    Palmetto Sharpshooter's, Commander
    9996V

  6. #6
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    102
    Region:
    Deep South - Georgia, Louisiana, Tennessee, Mississippi and Texas
    Quote Originally Posted by Michael Bodner View Post
    I figured out how to use this tool for my 50-yd sight - But how do you use it for the 100-yd (tall flip up)??
    Mike: for the taller leaf, I had to remove the leaf from the rear sight base while I "tuned" the sight drill guide to get the proper sight alignment, then replaced the leaf into the sight base to mark it from the guide. Hope that makes sense. Tom
    Tom Montgomery, 14th MS

  7. #7
    Eggman's Avatar
    Eggman is offline Banned
    Team:
    Iredell Blues
    Member
    7786v
    Join Date
    Mar 2010
    Posts
    1,763
    Region:
    Carolina - North Carolina and South Carolina
    This makes my head hurt (more).

  8. #8
    Michael Bodner's Avatar
    Michael Bodner is offline
    Team:
    8th Regiment Virginia Volunteers
    Member
    9996V
    Join Date
    Jun 2004
    Location
    Rock Hill, South Carolina
    Posts
    1,045
    Region:
    Potomac - Virginia, Maryland and Delaware
    Quote Originally Posted by tmont View Post
    Mike: for the taller leaf, I had to remove the leaf from the rear sight base while I "tuned" the sight drill guide to get the proper sight alignment, then replaced the leaf into the sight base to mark it from the guide. Hope that makes sense. Tom
    Tom,

    On my Zoauve, I could not get the sight 'in' with the tool attached. No where to place the flipped-down 50-yard portion of the sight...

    -Mike
    Mike 'Bootsie' Bodner
    Palmetto Sharpshooter's, Commander
    9996V

Similar Threads

  1. Peep Sight size
    By Jud96 in forum Shooting Techs, Tips, & Tricks
    Replies: 10
    Last Post: 09-28-2013, 10:23 PM
  2. For sale: peep sight drill guides, molds and sizers
    By George Gompf in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 05-01-2013, 12:18 AM
  3. WTB : Rear Sight Rig to Drill Peep Sight
    By Gray Ghost in forum Wanted/For Sale Items
    Replies: 2
    Last Post: 04-14-2013, 07:24 PM
  4. For Sale - Peep sight drill guides
    By George Gompf in forum Wanted/For Sale Items
    Replies: 2
    Last Post: 09-21-2012, 11:40 PM
  5. WANTED/Rear Sight Sighting Device for peep sight
    By Carl in forum Wanted/For Sale Items
    Replies: 3
    Last Post: 07-05-2012, 10:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •