View Full Version : Artillery Model Springfield Stock
twines
03-29-2014, 10:31 AM
What is the acceptable length of the wood for an artillary model Springfield?
Thanks
Tom
McGregors
Muley Gil
03-29-2014, 05:05 PM
Overall stock length, including the nose cap, is 44.25", with a 1/2" tolerance.
John Holland
03-29-2014, 05:34 PM
Time out! The stock dimensions depend on the barrel length.....32" or 33"?
Which one are you using?
JDH
Muley Gil
03-29-2014, 11:36 PM
My mistake. I was looking at the spec sheet I used and forgot that is was definitely marked "Short barrel version", which is for the 32" barrel.
My apologies.
John Holland
03-30-2014, 08:53 AM
Gil, no apology necessary!
Tom - If you are using a 33" barrel the OAL stock length is 45.25", +/- 0.50".
If you are using a 32" barrel the OAL stock length is 44.25", +/- 0.50".
Write to me direct and I will email you copies of the SAC sheets, jh44ny (at) Verizon.net
JDH
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.