3 bullet molds for sale

[jonk]

1. Italian (?- so I was told) brass .54 mold. This mold has some minor issues; namely the design of it pulls against the wall of the skirt as the plug is mounted to the bottom plate and only opens one way. As a result, the core pin pulls against one side and the skirt deforms. This could be dealt with in one of three ways. Either modify the mold with another screw to allow the mold to open from both directions, make a whole new bottom plate or lyman style plug, or just grind the core pin out and make a Sharps type flat bottom mold. $25 shipped or $20 if I deliver to the fort in October. I can't tell you the diameter due to the aforementioned issue. I haven't weighed it but it looks a bit shorter than my Lyman .54- I'd guess somewhere around 350-400 grains. STILL AVAILABLE

2. Lee .578 minie. Perfect for oversized bores. Doesn't do as well in my guns as some other molds, so I don't need this one. I've probably cast less than 100 out of it. With box. 478 grains, flat nose design. $20 shipped or $15 at the Fort. (SPF via an email.)

3. Lee .500 minie. 360 grains. Flat nose. Sold the gun, don't need the mold. Also used very little. $20 shipped or $15 delivered to the fort. (SPF via an email)

Check, M.O., paypal all ok. Email endofwork@netzero.com for questions. If you want one, please post here and either email or PM me.

http://i9.photobucket.com/albums/a67/jonklei/SAM_0850-Copy_zps3ebe6831.jpg (http://s9.photobucket.com/user/jonklei/media/SAM_0850-Copy_zps3ebe6831.jpg.html)


http://i9.photobucket.com/albums/a67/jonklei/SAM_0851-Copy_zps452d8ae5.jpg (http://s9.photobucket.com/user/jonklei/media/SAM_0851-Copy_zps452d8ae5.jpg.html)

http://i9.photobucket.com/albums/a67/jonklei/SAM_0854-Copy_zps93985b46.jpg (http://s9.photobucket.com/user/jonklei/media/SAM_0854-Copy_zps93985b46.jpg.html)
http://i9.photobucket.com/albums/a67/jonklei/SAM_0853-Copy_zpscb0e4fc8.jpg (http://s9.photobucket.com/user/jonklei/media/SAM_0853-Copy_zpscb0e4fc8.jpg.html)

Thanks,

Jon