View Full Version : Is there an RCBS equivalent to the Lyman 575213PH?
Maillemaker
06-24-2013, 09:33 AM
Is there an RCBS equivalent to the Lyman 575213PH mold?
I already have RCBS handles and I like the integral core rather than a separate handle to remove the core on the Lyman molds.
Steve
hwaugh
06-24-2013, 10:51 AM
I've had Charlie Hahn convert my Lyman 575213 NS to a floating center pin. Great work, very reasonable.
Maillemaker
06-24-2013, 11:46 AM
I think I'm going to take my RCBS 500M and shim the float so that the core pin sits back a little farther, making for a longer, heavier bullet.
Steve
Jim_Burgess_2078V
06-24-2013, 12:32 PM
You could always take a standard RCBS Minie mold and cut/grind/file down the center pin to the profile of the Parker-Hale type center pin. If you wish to preserve the original base pin, get a machinist to fabricate a new one to your specifications.
Jim Burgess, 15th CVI
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.