VMI88
05-07-2013, 01:09 PM
I've got an original M1863 Springfield Type I (screw bands) that I'd like to restore. It was obviously used as a skirmish weapon at some point because the barrel has been relined. Unfortunately this was done by chopping off the last few inches of the breech -- including the bolster -- and installing a new one. The new breech is functional but isn't the correct type with an eagle on the bolster.. It also doesn't fit the lockplate correctly and there is a metal shim between the bolster and the barrel to fill the gap.
I'd like to restore this to its original configuration. Obviously an original barrel would work (and I've posted a WTB ad on this site). Another option is a new Hoyt barrel. Are there any other options that might be less expensive, such as having someone replace the breech on the current barrel? If not, does the current barrel have resale value that might help me offset the cost? I'm a reenactor and very occasional target shooter, so I'm not looking for the greatest accuracy, just something functional. Any assistance would be appreciated.
I'd like to restore this to its original configuration. Obviously an original barrel would work (and I've posted a WTB ad on this site). Another option is a new Hoyt barrel. Are there any other options that might be less expensive, such as having someone replace the breech on the current barrel? If not, does the current barrel have resale value that might help me offset the cost? I'm a reenactor and very occasional target shooter, so I'm not looking for the greatest accuracy, just something functional. Any assistance would be appreciated.