Buzzo
02-27-2013, 10:06 AM
Hello all;
Looking for some suggestions for a load. I have recovered an original Potsdam in 72 Cal that is working after some minor repairs. Bore is .725 and I have a mold for .715 that seems to work fine after a test shoot yesterday. While all 9 shots were on the paper at 25 yds, the group was a bit wide and mostly high. (first one went into the berm at 100 as a safety test and was within 16 inches of aim point) I used 70 gr of 2FF Goex and 52 gr of 3FFF Goex. Lube is a mix the team is using and encountered no excessive fouling or difficulty loading after 10 shots.
Any suggestions for powder and charge to use? Thanks a lot for your suggestions.
Looking for some suggestions for a load. I have recovered an original Potsdam in 72 Cal that is working after some minor repairs. Bore is .725 and I have a mold for .715 that seems to work fine after a test shoot yesterday. While all 9 shots were on the paper at 25 yds, the group was a bit wide and mostly high. (first one went into the berm at 100 as a safety test and was within 16 inches of aim point) I used 70 gr of 2FF Goex and 52 gr of 3FFF Goex. Lube is a mix the team is using and encountered no excessive fouling or difficulty loading after 10 shots.
Any suggestions for powder and charge to use? Thanks a lot for your suggestions.