Quality cast iron Smoothy moulds and sprue cutters.......

[Bob Elka, 12001]

Will have an ample supply of .678's, limited .680, .685, .690......$125 ea If you've ever seen or used one you'll understand......
Sprue cutters, just chuck in coordless drill, drill press or lathe (slow speed) and remove that unwanted sprue in seconds.....$20
small number of my revolver loaders..... $85 as usual.....
Available at Ball Accuracy booth (see Joe) or catch me in my travels.......Bob Elka, 17th Va... :D

[ian45662]

I did not see this post until I got back from nationals. I would like a sprue cutter. If you wouldn't mind to send it through the mail e mail me at ian45662@yahoo.com

[Fearless Frank]

I also miss an chance to get a spruecutter at the Springs, they sold out.
Want one walmag@verizon.net
Walt Magee

[Timmeu]

I also missed out on a cutter at Nationals. Send me the info to purchase one.

Timmeu@basswoodbob.com

Timmeu

[Jim Mulligan 7288V]

Bob,

Do you have a recommendation of ball diameter clearance for accurate shooting and easy loading?

Thank you,
Jim Mulligan

[Bob Elka, 12001]

:D I'll be getting to the next batch here pretty quick thanks for all the interest. They will remain at $20 and shipping will be
minimal. I'll be sure to announce when there ready to ship.........bob

[Fearless Frank]

Hve a check in the mail the minute you post. Thanks for the quick reply.

[tmont]

Just wondering if the sprue cutters are available yet. Thanks in advance.

[bilge water bob]

I just bought an Elka .680 mould, nicest mould I've ever owned, kicks out a great projectile and I didn't have any mistakes!!!!!!!!!well worth it

[NJArtillery]

Bob,

I sent you an email, I need one of your sprue cutters! Thanks!

[mike a]

Bob Elka Id like to buy another .678 smoothbore mold. If you want to mail it to me Ill send you a check or Ill send a check first. mike arnette 102 Roberta de LaGrange NC 28551 Thanks

[kowdok]

Bob
HP said he talked to you about making a couple of revolver loaders for me and my wife. If you have one, I would also like one of the sprue cutters. Please email me and let me know where to send a check and give me some idea of when you might have them available for shipping. Also need complete price with shipping.
My email is jjjrogers@abts.net
Jim Rogers
919 Midway Rd.
Statesville, NC 28625
phone-704-880-1662

[jd2ndvainf]

I want one of your spruecutters . Please let me know when available. John Doyle - trapdoor1888@yahoo.com

[hawkeye2]

I am interested in sprue cutters in .715" and .735" if you ever make them. hawkeye2@hughes.net

[jonk]

Bob,

I'd like to order a cutter for .678 balls; can pick up at nationals.

Jon

[Bob Elka, 12001]

I won't be attending the fall nationals this year but will try to get caught up by then. It's been a busy summer............ Thank you for you're patience everyone this is my hobby not my job and free time has
been at a premium lately........bob

[ian45662]

I would like a sprue cutter as well when ever you can get around to it. No rush

[mike a]

Will have an ample supply of .678's, limited .680, .685, .690......$125 ea If you've ever seen or used one you'll understand......
Sprue cutters, just chuck in coordless drill, drill press or lathe (slow speed) and remove that unwanted sprue in seconds.....$20
small number of my revolver loaders..... $85 as usual.....
Available at Ball Accuracy booth (see Joe) or catch me in my travels.......Bob Elka, 17th Va... :D

Bob Id like another .678 sb mold, can you mail it and Ill send a check? m arnette 102 Roberta Dr. LaGrange NC 28551

[jonk]

I won't be attending the fall nationals this year but will try to get caught up by then. It's been a busy summer............ Thank you for you're patience everyone this is my hobby not my job and free time has
been at a premium lately........bob

Not a problem. When you get caught up, I'll happily pay shipping in that case.

[Maillemaker]

I would like to buy a sprue cutter, but Bob's inbox is full.

Steve

[Divey]

Will have an ample supply of .678's, limited .680, .685, .690......$125 ea If you've ever seen or used one you'll understand......
Sprue cutters, just chuck in coordless drill, drill press or lathe (slow speed) and remove that unwanted sprue in seconds.....$20
small number of my revolver loaders..... $85 as usual.....
Available at Ball Accuracy booth (see Joe) or catch me in my travels.......Bob Elka, 17th Va... :D
I would like to purchase a sprue cutter for a .678 round ball.
Thanks
Dave

[Lou Lou Lou]

Bob hasn't posted since 2013 on this thread. Try sending him a PM

[Eggman]

Bob's inbox is full.

[Maillemaker]

Yup. I have tried PM, email, and facebook, to no avail.

Does anyone know how to manufacture one of these spru cutters? Can we get pictures of one?

Steve

[jonk]

Heck, I just saw him last month at Pete Zahner's Black Powder through the Ages... forgot all about the cutters. If I see him again I'll ask him.