PDA

View Full Version : WTB: burnside block holds nipple with flash hole up front.



John S.
02-14-2009, 02:26 PM
have picture if needed to identify correct part. thanks
john414r@hotmail.com

Fire18WFD
02-14-2009, 03:52 PM
S & S carries the block.

John S.
02-14-2009, 05:16 PM
thanks much for direction......................

Mike w/ 34th
02-16-2009, 02:58 PM
I have one of the S&S blocks. The flash hole is very large, so you can get it properly lined with platinum, if you happen to have a jeweler in the family. If you don't, you may have some problem with blowback.

It may take a little fitting where it fits into the breech. Should slide but not bind.

John S.
02-16-2009, 03:38 PM
had piece of wire down flash hole. been working on it and now seems flash hole open. don't know if wire is out ??? but it fires now. have to see how it works out on the range.....................thanks for reply

Mike w/ 34th
02-17-2009, 01:13 AM
If the flash hole on your original Burnside block gets plugged, you can try to open it up with piano wire or guitar string, but a much better way to clean out that carbon fouling is to get a set of jeweler's drill bits. If you google "lapidary supply", you'll find lots of places to buy.

It's better to buy a set than a particular size, because Burnside blocks vary in the size of the flash hole. I've got four blocks, and they're all different.

-Mike

John S.
02-17-2009, 10:46 AM
thanks for information. Think I may have gotten the piece of wire out. flash hole seems clear ?????