View Full Version : Looking for lubrisizing dies for RCBS lube-a-matic
Pudge58
02-08-2012, 06:53 PM
Looking for lubrisizing die for my RCBS lube-a-matic in .576 . Been trying for three days and no luck even when going to manufactor like Lyman . Help !!!!
Francis J. Miller Jr, 02601
02-08-2012, 07:14 PM
Pudge58;
Contact S&S Firearms, they should have them in stock and there turn around time is like 2-3 days. I got a .575 from them around last September. They have them in .001 increments. I have an RCBS Lube-A-Matic II, and I had no problems putting into the sizer body, it worked great, also comes with the top punch. Just called them, told what I needed, charged it to the credit card and had it in around 2 or 3 days. Here's their contact info. Hope this helps you.
S&S Firearms
Mailing Address | 74-11 Myrtle Ave Glendale, NY 11385
Telephone | Monday - Friday 10am - 5pm EST | (71 497-1100
Fax | (71 497-1105
Jack C., 69th NY
02-08-2012, 09:29 PM
Pudge58 & Herb,
Correct telephone number is 718-497-1100
Fax number is 718-497-1105
Ask for Phil.
Francis J. Miller Jr, 02601
02-08-2012, 10:10 PM
Jack,
Thanks for catching that missing 8 in the area code. I copied and pasted it from their site to make it quicker in the response and never noticed it.
Pudge58
02-09-2012, 01:17 AM
Thanks for the reply and info
Pudge58;
Contact S&S Firearms, they should have them in stock and there turn around time is like 2-3 days. I got a .575 from them around last September. They have them in .001 increments. I have an RCBS Lube-A-Matic II, and I had no problems putting into the sizer body, it worked great, also comes with the top punch. Just called them, told what I needed, charged it to the credit card and had it in around 2 or 3 days. Here's their contact info. Hope this helps you.
S&S Firearms
Mailing Address | 74-11 Myrtle Ave Glendale, NY 11385
Telephone | Monday - Friday 10am - 5pm EST | (71 497-1100
Fax | (71 497-1105
Squarehead1
02-12-2012, 03:29 PM
My RCBS Lubrisizer is about 35 yrs old. When I got my .575 from S&S, I found the bottom plug would not pass through the frame and therefore would not fully accept the bullet or return. Fixed by a little reaming of the body at a local machine shop for small $. Now works perfectly.
JF
Squarehead1
02-12-2012, 03:31 PM
My RCBS Lubrisizer is about 35 yrs old. When I got my .575 from S&S, I found the bottom plug would not pass through the frame and therefore would not fully accept the bullet or return. Fixed by a little reaming of the body at a local machine shop for small $. Now works perfectly.<br>JF
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.