PDA

View Full Version : Sharps Rapine Mold Wanted



devisser
01-12-2009, 08:03 AM
I am looking for a Rapine mold # .577465. I have two custom Christmas tree molds cut to Lyman's specks. One is the standard "sharps" style and the second is the same except it does not have the base. I would either trade both for the Rapine or sell. Willing to supply samples

Bob DeVisser 19th NYLA

Rlevin
11-21-2010, 07:16 AM
Did you ever sell your Sharps molds as I am interested in finding one for myself.

Russ

devisser
11-22-2010, 08:31 AM
Yes, I sold both of my sharps molds.

DAVE FRANCE
11-23-2010, 07:20 PM
If you cannot find a mold you like for the sharps, I can send you a drawing of the one I use, and you can get one made if you like.

I designed the bullet so the cylindrical part of the bullet is the groove diameter, and the ogive (forward part of the bullet) is designed to fit into
the bore diameter. So the bullet aligns with the barrel bore before it is fired. It makes the bullet very accurate in the Shiloh Sharps.

David