PDA

View Full Version : Lyman mold 577611 minie



Hipshot
10-05-2010, 04:58 PM
Anyone using the Lyman minie 577611 530 gr.? What are your thoughts on this bullet? I've got a chance to pick one up seccond hand.

mb3
10-10-2010, 09:14 PM
I have been using this Minnie out of my CS Richmond. So for I have only fired it with 777, but with 60gr 777 at 100 yards I have had no trouble keeping all shots inside a three inch shoot-n-see. I don’t have the mold I buy mine from Track of The Wolf.

ken chrestman
10-12-2010, 02:18 PM
The Lyman 577611 is an old design for heavy hunting charges, it has a heavy skirt but properly sized can give good accuracy but not with light target loads. A favorite deer bullet particularly ion Parker-Hale rifles. The P-H also likes the Wilkinson-Krupp.

Ken Chrestman 7147V

mb3
10-12-2010, 06:47 PM
I have a little amplifying info on this subject: I went to the range today shooting Goex 2fg and the Lyman 577611. With 65 gr at 100 yards I was on point of aim but about 1 inch low. I think this Minnie will work well if pushed. Say 67gr to 70gr 2fg.

Hipshot
10-13-2010, 08:38 PM
Thanks for the information. I went ahead and bought the mold. It came comeplete with handles in new condition for 30 bucks, figured I give it a try.