Earl Brasse
09-26-2010, 03:15 PM
Colt Walker PARTS FOR SALE:
If you ever wanted a few spre parts for yer Colt Walker … now’s yer chance.
These are some of the last bits of Colts Signature Series run. (The race was over before they were finished.) That’s it when they’re gone, they’re gone. If you ever think you might need spare parts, this is the time to salt a few away.
As has been said before, parts for the Colt Signature Series were made by Uberti for Colt.
Just ask & I’ll try to answer any questions.
(I also have Dragoon parts, please see my Dragoon add.)
Colt Walker PARTS
(Note: where I only have a few parts I have listed a (have X)
• Hammer , case hardened, integral cam style, case-coloring is black looking, has storage marks: $25.00 ea. (also fit 1st Model Dragoon, non-roller type)
• Mainsprings (“V” shaped mainspring): $14. Ea (also fit 1st Model Dragoon, non-roller type)
• Mainspring Latch (for “V” shaped mainspring) : $6.00 (also fit 1st Model Dragoon, non-roller type)
• Trigger, new blue: $ 9.00 ea.
• Nipple, blue: $12.00 (set of 6)
• Front Sight: German silver blade: $6.00 ea.
• Bolt, rectangular, would need modified to oval, (also for, 1st Model Dragoon) $11.00 ea.
• Bolt spring: $8.00(for 2 springs)
LOTS of loading levers… Need a spare? Or… Maybe a good start on a custom cylinder loading stand?
• Loading Lever Set contains: loading lever case colored, plunger case-colored, loading lever screw, plunger screw: $40.00 ea. (have 6 sets)
• Loading Lever Set contains: loading lever &, Plunger, Blued, (dark shiny, black/blue), loading lever screw, plunger screw: $40.00 ea. (only have one set)
• Loading Lever Set contains: loading lever case colored, (colors are poor in my opinion or have areas of finish missing etc.) plunger in-the-white, loading lever screw, plunger screw: $35.00 ea. (have 16 sets)
• Loading Lever Set contains: loading lever in-the-white, plunger in-the-white, loading lever screw, plunger screw: $30.00 ea. (have 8 sets)
• Loading Lever: (colors are poor in my opinion or have areas of finish missing etc.): $22.00 (have 9)
• Loading Lever: in-the-white: $18.00 (have 8)
• Loading Lever Spring: $11.00 ea.
• Screws, blue $1.75 ea. : Trigger/bolt-stop (fit Walker only)
Bolt-stop/trigger (fit Walker only)
Bolt spring
Back-strap/trigger-guard (4 required)
Back-strap bottom
Back-strap front
Loading lever (to barrel)
Plunger
• Screws, Set of the above 11 screws, (note, this is not a complete set of all the screws for the revolver): $16.00 (per set)
• Wedge, factory take-outs with broken or missing springs, may be #’ed: $5.00 (for 2)
((have 9 pair))
Parts shipping : $5.00 in the USA, where it is legal for you to receive them & me to ship it.
Thanks fer lookin’ (‘an all that readin’) any questions, just shoot me a pm or an e-mail.
First “I’ll Take It” posted on the wire gets it.
If you ever wanted a few spre parts for yer Colt Walker … now’s yer chance.
These are some of the last bits of Colts Signature Series run. (The race was over before they were finished.) That’s it when they’re gone, they’re gone. If you ever think you might need spare parts, this is the time to salt a few away.
As has been said before, parts for the Colt Signature Series were made by Uberti for Colt.
Just ask & I’ll try to answer any questions.
(I also have Dragoon parts, please see my Dragoon add.)
Colt Walker PARTS
(Note: where I only have a few parts I have listed a (have X)
• Hammer , case hardened, integral cam style, case-coloring is black looking, has storage marks: $25.00 ea. (also fit 1st Model Dragoon, non-roller type)
• Mainsprings (“V” shaped mainspring): $14. Ea (also fit 1st Model Dragoon, non-roller type)
• Mainspring Latch (for “V” shaped mainspring) : $6.00 (also fit 1st Model Dragoon, non-roller type)
• Trigger, new blue: $ 9.00 ea.
• Nipple, blue: $12.00 (set of 6)
• Front Sight: German silver blade: $6.00 ea.
• Bolt, rectangular, would need modified to oval, (also for, 1st Model Dragoon) $11.00 ea.
• Bolt spring: $8.00(for 2 springs)
LOTS of loading levers… Need a spare? Or… Maybe a good start on a custom cylinder loading stand?
• Loading Lever Set contains: loading lever case colored, plunger case-colored, loading lever screw, plunger screw: $40.00 ea. (have 6 sets)
• Loading Lever Set contains: loading lever &, Plunger, Blued, (dark shiny, black/blue), loading lever screw, plunger screw: $40.00 ea. (only have one set)
• Loading Lever Set contains: loading lever case colored, (colors are poor in my opinion or have areas of finish missing etc.) plunger in-the-white, loading lever screw, plunger screw: $35.00 ea. (have 16 sets)
• Loading Lever Set contains: loading lever in-the-white, plunger in-the-white, loading lever screw, plunger screw: $30.00 ea. (have 8 sets)
• Loading Lever: (colors are poor in my opinion or have areas of finish missing etc.): $22.00 (have 9)
• Loading Lever: in-the-white: $18.00 (have 8)
• Loading Lever Spring: $11.00 ea.
• Screws, blue $1.75 ea. : Trigger/bolt-stop (fit Walker only)
Bolt-stop/trigger (fit Walker only)
Bolt spring
Back-strap/trigger-guard (4 required)
Back-strap bottom
Back-strap front
Loading lever (to barrel)
Plunger
• Screws, Set of the above 11 screws, (note, this is not a complete set of all the screws for the revolver): $16.00 (per set)
• Wedge, factory take-outs with broken or missing springs, may be #’ed: $5.00 (for 2)
((have 9 pair))
Parts shipping : $5.00 in the USA, where it is legal for you to receive them & me to ship it.
Thanks fer lookin’ (‘an all that readin’) any questions, just shoot me a pm or an e-mail.
First “I’ll Take It” posted on the wire gets it.