View Full Version : Thoughts on Mike Yeck, Smith Carbine?
haddockkl
01-24-2024, 05:21 PM
I just turned up a Yeck Smith carbine, seems to have had a bump in the stock which appears a bit off but otherwise unbroken, and the clean out screw may have broken in the past, it has since been retapped 6x48 and is a blind hole. Anything particularly peculiar about these, and are any pf the things mentioned above common?
haddockkl
01-24-2024, 11:19 PM
Turns out the cleanout screw didn't terminate at a blind hole, but that it had that much crud built up, I'm soaking the breech and will hopefully clear the flash hole. The serial number is in the low 400s.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.