View Full Version : Tang screw for JRA Richmond Carbine
Fire18WFD
03-26-2023, 07:32 PM
Which Sutler would have a Tang screw for a James River Armory Richmond Carbine?
Joe Plakis, 9575V
03-27-2023, 10:54 AM
That would be a Euroarms screw....
Fire18WFD
03-27-2023, 08:04 PM
That would be a Euroarms screw....
Unfortunately it is SAE thread.
Maillemaker
03-28-2023, 12:36 PM
I can make a drawing of the screw so you can have one made.
Steve
Fire18WFD
03-28-2023, 08:03 PM
I can make a drawing of the screw so you can have one made.
Steve
I have the original screw it?s broken.
mike davenport
03-28-2023, 10:05 PM
You could silver solder or braze it back together? you could also turn down a larger bolt/ screw to make the tang screw if you dont have access to a machinist. just some thougths- not trying to be funny or snide
md
Maillemaker
03-31-2023, 11:55 AM
I would take the screw to a local machine shop and have them fab you a new one.
John Bly
03-31-2023, 08:56 PM
Most local machine shops have a minimum charge which is much more than one screw is worth. Best to find a home shop machinist who will do the job for much less.
BADSHOT
04-01-2023, 07:17 AM
Could you re-tap the trigger bar for a original screw?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.