Muley Gil
10-26-2022, 03:15 AM
One of the keys to accuracy is matching the bullet the bore. A bullet .001"-.002" smaller than the bore is needed to obtain a good fit and still slide the barrel during a match.
I found these pin gauges on Amazon and will be ordering several from .575" to .582".
HHIP 4103-0500 Replacement Pin Gage, P-2 (-0.0002) Tolerance, 0.5": Amazon.com: Industrial & Scientific (https://www.amazon.com/HHIP-4103-0500-Replacement-0-0002-Tolerance/dp/B01BHHPV7G/ref=sr_1_20?c=ts&keywords=Pin%2BGauges&qid=1666767900&qu=eyJxc2MiOiI0LjYxIiwicXNhIjoiNC45OSIsInFzcCI6IjQ uNTMifQ%3D%3D&s=industrial&sr=1-20&ts_id=401593011&th=1)
I found these pin gauges on Amazon and will be ordering several from .575" to .582".
HHIP 4103-0500 Replacement Pin Gage, P-2 (-0.0002) Tolerance, 0.5": Amazon.com: Industrial & Scientific (https://www.amazon.com/HHIP-4103-0500-Replacement-0-0002-Tolerance/dp/B01BHHPV7G/ref=sr_1_20?c=ts&keywords=Pin%2BGauges&qid=1666767900&qu=eyJxc2MiOiI0LjYxIiwicXNhIjoiNC45OSIsInFzcCI6IjQ uNTMifQ%3D%3D&s=industrial&sr=1-20&ts_id=401593011&th=1)