CAGerringer
01-25-2022, 06:54 PM
Since we're talking about Smith hinges...I've got a question. I had a problem with my hinge loosening up. I took the screw out and found some decent wear marks around the hinge ring areas. The easy fix was a new screw before I jumped into relining and resizing the hinge holes. I ordered a Pietta part from Taylor & Co. and it fit very nicely. The hinge was tighter, but screw was sitting back about 1/16". See pic #1. The screw shaft was about 1" from the shoulder of the Head and the end of the threads. See pic #2. The threaded portion is about 3/16" long, and only engages about 2 threads when tightened. The overall length is 1 5/32". See pic #3.
I think I need a screw with an overall length of 1 1/4". Does anyone know where I can get one?
Respectfully,
Charlie Gerringer
Old Dominion Dragoons
Hinge screw.jpg (https://www.n-ssa.net/vbforum/attachment.php?attachmentid=11770&stc=1&d=1643153127) Hinge scew 2.jpg (https://www.n-ssa.net/vbforum/attachment.php?attachmentid=11771&stc=1&d=1643153175) Hinge screw 3.jpg (https://www.n-ssa.net/vbforum/attachment.php?attachmentid=11772&stc=1&d=1643153201)
I think I need a screw with an overall length of 1 1/4". Does anyone know where I can get one?
Respectfully,
Charlie Gerringer
Old Dominion Dragoons
Hinge screw.jpg (https://www.n-ssa.net/vbforum/attachment.php?attachmentid=11770&stc=1&d=1643153127) Hinge scew 2.jpg (https://www.n-ssa.net/vbforum/attachment.php?attachmentid=11771&stc=1&d=1643153175) Hinge screw 3.jpg (https://www.n-ssa.net/vbforum/attachment.php?attachmentid=11772&stc=1&d=1643153201)