Virtual Rummage Sale

[danajhanson]

SALE ENDING TODAY (MAY 12, 2020) AT 6 PM EST

SOLD - NE Trade Co. Sizing Die .535 with 20# .54-.58 red quick load tubes $15
SOLD - Lead round balls .678, 75# (3 bags of 25) with 10# brass brushes, 20# black quick load tubes and file $20
SOLD -Robert E. Lee Hitch cover (2"receiver) $10
SOLD - Brooks Sharps bullet mold with handles. Not stamped with size, but it is a .545 cast bullet in block $80
SOLD - Moose Mold w handle (NIB) 538430 $80
SOLD - Rapine w handle 578315 $60
SOLD - Rapine w/ handle 580460 $60
SOLD - Rapine w/ handle 575460 $60
SOLD - Lyman w/ handle 685 minnie $60
SOLD- Lee w/handle 58 Wilkinson $25
SOLD - Belding and Mull power loader with RCBS powder trickler $75
SOLD - .557 Sharps cast bullets 80# with 150+ Charlie Hahn tubes size? $10
SOLD - Vintage Tasco spotting scope 20-60 x 60 $15
SOLD - Hard steel targets, custom made to standard N-SSA targets (pigeon, sm & large tile, foam cup) $20
SOLD - T/C smoothbore .56 cal barrel (new) $20

[Bob Gorsky 10483]

Sent you a PM on 2 items
Thanks,
Bob Gorsky

[Des]

If the Lee hitch cover is available I will take it

[geezmo]

Dana,

If Rapine 580460 mold is available I'll take it. PM sent.

Barry S

[Michael Bodner]

I know this might seem to be a strange request, but here it is: To the person that is purchasing the Rapine 578315 SWC mold - Would you consider selling it (or passing on it)? I'm working up a Zouave for a new member using my Rapine 580315 SWC sized down to 578 and it's making one ragged hole. So I need to find him a mold...

Anyway, figured all you can do is say no! Or tell me to take a flying leap!!

Thanks!

-Boots

[Harry Gaul]

I will take the 678 round balls. Please ship in a standard USPS small Priority box for $8.20 ish. Please fill the box with round balls, then brass brushes then quick load tubes in that order. If it does not fit, do not ship.

I can send a check or paypal. I prefer paypal.

True Blue and Diamond Hard,
Harry
03626v

[danajhanson]

thanks to all that bought items...I will get them out tomorrow or next.

DJH

[hawkeye2]

The Belding & Mull seems to be missing the drop tube which is the actual measure itself.

[Lou Lou Lou]

Easy to fabricate with tubing and a steel rod

[bobanderson]

The Belding & Mull seems to be missing the drop tube which is the actual measure itself.

I use a Belding & Mull for every black powder shot I take, musket, carbine pistol and smoothbore. The opening the powder drops through is 1/2" diameter. An adjustable black powder measure works great.

[Lou Lou Lou]

I made mine
Tube with 1/2 od and 3/8 id. Pieces of 3/8 rod. Drill and tap for set screw. Machine a flat on rod. Each 3/8 equals approx 10 grains FFFg