WBR10654
11-02-2018, 06:40 PM
One of my Luber Sizers was leaking so I took it if the bench and the Plug at the bottom where the rod connects was failing out.
The part that fell out has a seal on it but it and the main casing are not threaded, so I am unsure how the thing stay in place in the first place.
There are "marks" on the edges spaced equal distance apart which make me think it was press in and then "thonked" around the edges to hold it in place.
This is the version of the 450 with the single Black Handle,,, not the Red One.
I looked at the parts diagram and it is not on there so I assume it is installed at te Factory and is not supposed to fall out.
Any assistance would be appreciated.
DPB
The part that fell out has a seal on it but it and the main casing are not threaded, so I am unsure how the thing stay in place in the first place.
There are "marks" on the edges spaced equal distance apart which make me think it was press in and then "thonked" around the edges to hold it in place.
This is the version of the 450 with the single Black Handle,,, not the Red One.
I looked at the parts diagram and it is not on there so I assume it is installed at te Factory and is not supposed to fall out.
Any assistance would be appreciated.
DPB