View Full Version : Roundball mold
Scott w/1st Fla
11-06-2009, 05:47 PM
Teammate just got a cadet and I was told he needed a .562 mold. Anyone have one they dont need? Thanks Scott
John Maderious
11-06-2009, 06:04 PM
I believe Rapine makes a .560 Assuming that is true, if hard lead is used in a .560 mold it should expand up to .562 John Maderious 10223
Walt Magee
11-06-2009, 06:06 PM
If you can't find one, Jeff Tanner makes moulds RB in almost any size.
Google round ball bullet moulds and look for J T Moulds. He is in Britain but you'll have it within a week. AND he's cheap!
Harry Gaul
11-06-2009, 10:26 PM
I am going out of town this weekend and when I return I will look for a 562. I have so many molds; it is hard to remember.
True Blue and Diamond Hard,
Harry Gaul
3rd US
JW 5875V
11-06-2009, 11:56 PM
Good Luck For Rapine,
I have been using Lyman for many years. Yes! they are hard to find, but made of Steel.
I have tried to contact Rapine (aluminum) numerous times for info and dealer sales.
No reply / phone call etc. only sells at Nationals personally.
Jim W 5875V
Terry Davis 10639
11-07-2009, 11:43 PM
If you can't find one, Jeff Tanner makes moulds RB in almost any size.
Google round ball bullet moulds and look for J T Moulds. He is in Britain but you'll have it within a week. AND he's cheap!
Thanks to your post, I learned his name is Jeff Tanner. I have been trying to locate his name for a while.
WIth that, I found his site:
http://www.jt-bullet-moulds.co.uk/
Terry
Wayne Shaw, 1985V
11-08-2009, 10:41 AM
Scott There is a .562 mold on E Bay. Number is 270481282497.
the current bid is low, states it's new. Hope this helps. Wayne Shaw Harlan's Light Cav
Harry Gaul
11-09-2009, 10:08 PM
Scott,
I found a Lee 562 round ball mold. It is $25 shipped. If you do not like it, return within 7 days or email me if you need more time.
True Blue and Diamond Hard,
Harry Gaul
3rd US
Scott w/1st Fla
11-10-2009, 04:21 AM
To Harry, Wayne, and all the others that replied - Thank you. I/we did the leg work now my teammate is following up on one. Thanks again for your help.
MR. GADGET
11-10-2009, 11:52 PM
Let me know what works, I have 2 of the Cadets being built now.
Will need a mini and a roundball mold.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.