For sale: Peep sight drill guide

[tmont]

Sold pending funds.

Offered for sale is a peep sight drill guide made by Tennessee Bullet Moulds, the company of my good friend George Gompf (Forest Escort Team, Deep South Region).

This device clamps to the rear sight base of your musket or carbine. It has windage and elevation adjustments which you use to sight in with your weapon. Once you are happy with the peep sight location, you re-install the rear leaf and transfer the peep location from the hardened eye piece on the drill guide to the leaf and drill the peep sight hole in the leaf. Works perfectly.

Here is a link to some photos of the drill guide which I uploaded to photo bucket:
http://s1379.photobucket.com/user/tmont1950/library/Peep%20sight%20tool

I am offering for sale as I have made the peeps I need. It is in excellent condition, used only two times.

Retail was $100 when I purchased.
Will sell for $60 which includes shipping to the lower 48.

Thanks in advance.
Tom

[John Holland]

Tom - I will purchase your drill guide. Contact me direct please for confirming details: jh44ny(at)Verizon.net.

Thank you,
John Holland

[tmont]

Tom - I will purchase your drill guide. Contact me direct please for confirming details: jh44ny(at)Verizon.net.

Thank you,
John Holland

Morning, John.
You got it, my friend!
Will send you an email.
Best regards.
Tom

[JimSmith]

Now I know who to borrow it from.

Smitty

[Michael Bodner]

I figured out how to use this tool for my 50-yd sight - But how do you use it for the 100-yd (tall flip up)??

[tmont]

I figured out how to use this tool for my 50-yd sight - But how do you use it for the 100-yd (tall flip up)??
Mike: for the taller leaf, I had to remove the leaf from the rear sight base while I "tuned" the sight drill guide to get the proper sight alignment, then replaced the leaf into the sight base to mark it from the guide. Hope that makes sense. Tom

[Eggman]

This makes my head hurt (more).

[Michael Bodner]

Mike: for the taller leaf, I had to remove the leaf from the rear sight base while I "tuned" the sight drill guide to get the proper sight alignment, then replaced the leaf into the sight base to mark it from the guide. Hope that makes sense. Tom

Tom,

On my Zoauve, I could not get the sight 'in' with the tool attached. No where to place the flipped-down 50-yard portion of the sight...

-Mike