PDA

View Full Version : Maynard and Smith carbines, rate of twist



fullertc
04-08-2015, 07:26 PM
What's the rate of twist for the .50 cal Maynard? Has anyone had any luck with the Rapine .515320 bullet in a Smith? I have a Hoyt reline Smith w/ a 1/54 twist.
Thanks.

Lou Lou Lou
04-10-2015, 04:21 PM
I have a Hoyt reline Smith that shoots the .515-320 like a champ.

RaiderANV
04-10-2015, 08:17 PM
1-58 & 1-62

fullertc
04-13-2015, 03:33 PM
What's the rate of twist for the .50 cal Maynard? Has anyone had any luck with the Rapine .515320 bullet in a Smith? I have a Hoyt reline Smith w/ a 1/54 twist.
Thanks. Lou, what powder and charge do you use for the .515320?

Lou Lou Lou
04-13-2015, 04:50 PM
25 grains Goex FFFg

fullertc
04-25-2015, 06:20 AM
25 grains Goex FFFg

Lou, I got the mold. Do you use a cow filler to seat the bullet out or just seat it tight on the powder? How does it fly at 100 yds? Thanks.

RaiderANV
04-25-2015, 08:52 PM
I use the same bullet with 24 of 3F Goex and ot seats right on the powder. Shoots better then you can hold at 50 & 100

Lou Lou Lou
04-26-2015, 06:56 PM
I hace reduced capacity cases. 25 grs comes right ti the inner rim. I tap the case to get the powder to settle.