View Full Version : Rear peep sight drilling tool
CAGerringer
03-10-2015, 09:36 PM
Who sells the rear peep sight drilling tool? I need one that will fit a Zouave.
Charlie Gerringer
Old Dominion Dragoons
Don Branch 12592
03-10-2015, 10:13 PM
Who sells the rear peep sight drilling tool? I need one that will fit a Zouave.
Charlie Gerringer
Old Dominion Dragoons
I got mine from:
George Gompf
Tennesse Bullet Molds, LLC
731-234-5490 (tel:731-234-5490)
Lou Lou Lou
03-11-2015, 03:34 PM
How is it? Can you get the peep hole low enough?
Don Branch 12592
03-11-2015, 04:06 PM
It worked great. I used it to put a peep on my Zouave and found it to be very easy and accurate. At about $115 it's a little pricey to only use once or twice, but it is well made.
ian45662
03-11-2015, 06:48 PM
I have one. Clamped it on the sight base and moved the peep around till the gun was hitting where I wanted it to. Put the leafe back in and rand the drill bit through the peep locator just to mark the leaf and I removed the leaf and did the drilling on a drill press. When put the leafe back on and shot it the bullets were hitting exactly where I wanted them
Lou Lou Lou
03-11-2015, 06:54 PM
Thanks, appreciate the info
MR. GADGET
03-12-2015, 01:15 PM
Every team should own one.
I took it for the team and got on so we would have one to use.
Make sure no one on your team has one then pick one up from George
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.