Activity Stream

Very surprised that no one has set up to mass production of the bullets we make and shoot. After it is set up only new costs is in lead and a way...

I believe that is a Zoli made Missisippi. Navy Arms bought Replica Arms and Zoli made their Mississips and Zouaves. Look at the makings under the...

As John pointed out, you can shoot them "naked" just fine in the N-SSA. It's not a period-correct way to use the bullet, but if it works, it works....

Partly. We do permit combustible paper rounds for sharps and revolvers so that isn't the whole rationale; I think part of it too is the fast loading...

Dear Sir, I have an 1841 Mississippi for sale but It is not a Zoli. This one is an American made vintage reproduction from What I believe is a now...

I have a NOE mould for those and they shoot incredibly well. And of course that would be the way to go with normal swaging dies. But where is the...

I haven't found ones as of yet.

Did you measure the lands or grooves? I measured my lands by putting in pin gauges. .578 .579 i believe so i size to .577

Actually, I have found a lot of them in the backstop at the range in Winchester. They are using standard oversize Pritchett type bullets with lube in...

True, but that bullet is currently useless in N-SSA competition. Steve

ND1887, IRT my earlier question re barrel removal from muzzle stuffers... Yes - having the correct sized screw driver(s) for disassembly is a...

Go with swaging an Enfeild style bullet and the grease groove problem is solved.

My mask!

PM message sent

I haven't taken the barrel off yet, but im assuming in involves getting the correct size screw drivers to not bugger up the screws. I think you just...

ND1887 - QUESTION for you: Apologies if I didn't read it in earlier threads - but do you know how to PROPERLY remove the barrel from the stock, so...

Did you find a Mississippi yet May have 1 available

So the rifle looks nice until you shine a light into the light pitting and it looks like rust is still there should I be worried or is that normal?

In my opinion, the best caps are German RWS Dynamite Nobel. It is all I use in competition. CCI got sued some years ago and weakened their caps. ...

The gal behind the cash register was wearing a welder's mask. Ain't American ingenuity great?? Bill Shuey

Ordered the pin gauges.

I think that you meant diaper. Good one. True blue and Diamond hard, Harry 03626v Sent from my iPhone using Tapatalk

Is that a dipper I hope you washed it first. Lol Sent from my iPhone using Tapatalk

You were probably put on an NSA watch list before you got done typing.

Wonder what USPS would do if I sent you a flat rate ship anything anywhere box? Some powder, primers, and test bullets....... I know, I...

Make sure it is SS. If not it will just rust more and spread the rust. Really Fargo? Really? I grew up in Jamestown, back in the 70's.

Yep what he said is spot on. Those gauges are about all you need. I picked the plus and minus just to have a closer range. But from what I...

Dang guys! that is perfect and thanks for all the responses,Got the steel wool out seems to work good on the little bit of heavy rust but does...

For a typical 58 caliber gun you would probably be served fine with pin gauges in: .575 - https://www.travers.com/class-zz-pin-gage/p/58-205-750/...

This is actually getting to be common and you have to watch for it. Some online stores will sell you things for more based on where you live and...