Post deleted
Post deleted
Last edited by Eggman; 08-23-2018 at 07:30 AM.
Slides my recliner ah lil closer with soda and popcorn in hand. Great view now.....continue in video please!
* side note......I have PLENTY of expensive original Second Model parts if you mess up Sir Eggs. Post a pic of that spring??
Never squat with yer spurs on!!!
Pat "PJ" Kelly #5795V
Virginny & Texas
540-878-8024
MAYNARDS RULE!! & starr's DROOL!
Hence the rust. MAYNARDAE LAUS DEO!
I pretty much got the same result by replacing the original mainspring with a Larry Gollahan spring. 12 pounds to 4 just like that. Voila.
Anyone know where I can get another one of those springs now that Larry isn't with us? After using it every season for the last 15 years it is finally too weak to consistently set caps off. Had to put the original spring back in! Not good for the upcoming nationals with a heavy trigger! At temporary shim on the full cock notch gets me to around 5 pounds - good enough for now, but well, no it's not.![]()
Tom Magno, 9269V
29th Wisconsin Volunteer Infantry
Get your hands on a Yeck mainspring. Bruce Cobb may have one.
Lou Lou Lou Ruggiero
Tammany Regt-42nd NYVI
PleAse disregard. Mind went blank Thinking smith not Maynard . Smh
Lou Lou Lou Ruggiero
Tammany Regt-42nd NYVI
I'll have some with me at the Nationals Tom. I've tried every repro spring I have come across and Larry's is the best I've found so far.
Never squat with yer spurs on!!!
Pat "PJ" Kelly #5795V
Virginny & Texas
540-878-8024
MAYNARDS RULE!! & starr's DROOL!
Hence the rust. MAYNARDAE LAUS DEO!
Hi, Eggman:
Could it be, as it is on my First Models, that a rectangular, picture frame shaped stirrup fits between and serves to connect the spring "hook" with the corresponding hook on the hammer?
Thanks.
Kevin Tinny
Those "side tits" are to keep the MISSING stirrup on the main spring. The stirrup hooks on that hook on the hammer. You filed what appears to be an original $125-175 main spring.
It is the "sweetest" gun I own...." That's because it's ah Maynard Eggs!!
PS..... Distinct possibility that original spring filed thin will break. I have several I've removed from guns I bought over the years that had broken filed springs in them.
Last edited by RaiderANV; 09-18-2017 at 07:28 PM.
Never squat with yer spurs on!!!
Pat "PJ" Kelly #5795V
Virginny & Texas
540-878-8024
MAYNARDS RULE!! & starr's DROOL!
Hence the rust. MAYNARDAE LAUS DEO!
Several years ago I purchased Larry Gollahans remaining springs and the mold. I have had them made up since and have sold quite a few. His were marked with a "G" and mine are marked with a "B". They are the same spring except I think I did a better job on quality control. Nothing against Larry as he has passed on. I always made sure they had the proper curvature and were well deburred. S&S should have the springs in stock. Right now I'm out. I've got a batch of 85 castings that need worked up and heat treated. I'll have them complete by spring.
Eggman, You are missing the stirrup that connects the spring to the hammer. It is a rectangular shape that hooks on the spring and that hook shape on the hammer.. They will work without one but work much better with one.
Bookmarks