Lyman Mold Machine Work

[RobBethke3rdMDArty]

Good day all! I am looking to see if somebody has the ability(or knows of somebody) to cut a second c clip grove in a Lyman mold plug. I bought a 575-213 OS sans base plug and want the use my NS plug in the mold once a new grove is cut in the plug. I've spoken to a couple of competent machinists, they can do it, but would need to make a tool to cut the grove first.

Thanks all,

Hollywood

[Maillemaker]

I think Charlie Hahn does mold rework.

http://www.hahnmachineworks.com/

He is on here, too.

Steve

[Smosin]

http://www.hollowpointmold.com/

[Charlie Hahn]

I may be able to help, what is the width of the snap ring?

Charlie Hahn
410-208-4736

[Bob Gorsky 10483]

Rob, I can also do it for you, I've done a few for others, Bob Gorsky

[RobBethke3rdMDArty]

Thanks for all the help. Charlie & Bob, I'll follow up with you both. I left both the mold, plug and drawing with my Father.

Thank you,

Rob

[RobBethke3rdMDArty]

Good morning. Here is a schematic of the plug and potential new c-clip groove with dimensions. Charlie, are you available for a call today sometime to discuss options for machine work?

Thank you,

Rob


P.S. Thank you Bob for your help. I appreciate your willingness to assist!

[RaiderANV]

Another spammer......imagine that.....