Results 1 to 4 of 4

Thread: Gun, moulds, and RCBS lead pot for sale

  1. #1
    Jim Wimbish, 10395's Avatar
    Jim Wimbish, 10395 is offline
    Team:
    8th Regiment Virginia Volunteers
    Member
    10395V
    Join Date
    May 2004
    Location
    Clarksburg, MD
    Posts
    722
    Region:
    Potomac - Virginia, Maryland and Delaware

    Gun, moulds, and RCBS lead pot for sale

    Items for sale.

    1. SOLD Whitney Militia Rifle for Sale with SAC Card. Beautiful custom Whitney with heavy barrel and long range rear sight with washers for 50 and 100 yards. Dovetailed front sight. Barrel is 1/60 twist with 7 lands and grooves. Currently use .575 Brooks bullet weighing 465 grains in it. Gun was built by Bobby Hoyt, is finished in the bright, and has a Hoyt barrel (of course!). $1,350. Can deliver to Fort Shenandoah at the Gator, Potomac or Nationals Picture link is below

    2. SOLD RCBS Pro Melt 20 pound bottom pour lead pot. I picked this up the other day and as I already use two of them, I am going to sell this one. If you want to cast quality bullets, you need a quality pot like this one to properly control temperature and lead flow. I used the inexpensive Lee pots for years and while they work, the difference is night and day. This pot is about 7 years old and has been lightly used. I tested it out last night with the new moulds that I acquired and it worked great, just like my other two RCBS Pro Melt pots. $235, delivered to Fort. See photo link

    3. SOLD Rapine 580 -510 aluminum bullet mould. Casts undersized at .578". Mould has been coated with mould prep and has been well cared for. See photo for sample bullet and actual size of cast bullet. $80

    4. SOLD Rapine 577 - 510 aluminum bullet mould. Mould has been coated with mould prep and has been well cared for. See photo for sample bullet and actual size of cast bullet $80

    5. SOLD Rapine 575 - 510 aluminum bullet mould. Mould has been coated with mould prep and has been well cared for. See photo for sample bullet and actual size of cast bullet $80

    6. Lyman 213 New Style 510 grain Steel minie mould that casts a .575 inch bullet. Mould has been professionally modified to have a captive base plug. The original removable base plug is included with the mould. $80 like new

    7. Sold Lyman 213 Old Style 430 grain Steel minie mould that casts a .576 inch bullet. Mould has been professionally modified to have a captive base plug. The original removable base plug is included with the mould. $90 like new

    8. Custom mould handle with separate handle to open mould. $15

    9. Lyman lead thermometer. These sell for $45 to $50 on Ebay. You can have this one for $20. Tested it last night and it works fine.

    Pictures of all items can be found at the link below.

    Thanks for looking!


    Here is the link for the pictures: http://s1379.photobucket.com/user/Ji...7%20for%20sale
    Last edited by Jim Wimbish, 10395; 10-08-2017 at 08:50 PM. Reason: Prices reduced
    Jim Wimbish

    Member of NSSA since 2000



  2. #2
    Jim Wimbish, 10395's Avatar
    Jim Wimbish, 10395 is offline
    Team:
    8th Regiment Virginia Volunteers
    Member
    10395V
    Join Date
    May 2004
    Location
    Clarksburg, MD
    Posts
    722
    Region:
    Potomac - Virginia, Maryland and Delaware
    Prices reduced.
    Jim Wimbish

    Member of NSSA since 2000



  3. #3
    Jim Wimbish, 10395's Avatar
    Jim Wimbish, 10395 is offline
    Team:
    8th Regiment Virginia Volunteers
    Member
    10395V
    Join Date
    May 2004
    Location
    Clarksburg, MD
    Posts
    722
    Region:
    Potomac - Virginia, Maryland and Delaware
    I will have the Whitney Militia Rifle for sale at the Nationals.
    Jim Wimbish

    Member of NSSA since 2000



  4. #4
    1Hawkeye is offline
    Team:
    Visitor (non-N-SSA Member)
    Member
    NA
    Join Date
    Oct 2017
    Location
    Bealeton , Va
    Posts
    6
    Region:
    Potomac - Virginia, Maryland and Delaware

    Lyman thermometer

    Jim, I'm interested in the Lyman thermometer. I should be at the fort friday afternoon and saturday.
    Either at C.S.arms or Mike Kleinpeters booth.
    Thanks
    David

Similar Threads

  1. Assorted Lyman & RCBS Moulds For Sale
    By rflmskt in forum Wanted/For Sale Items
    Replies: 4
    Last Post: 06-15-2015, 03:04 PM
  2. Moulds and Lead Pot for sale
    By Josh Lauck in forum Wanted/For Sale Items
    Replies: 5
    Last Post: 03-19-2015, 04:35 PM
  3. rcbs lead melter $150
    By smokenpowder in forum Wanted/For Sale Items
    Replies: 3
    Last Post: 03-04-2012, 08:55 AM
  4. RCBS Molds for Sale / Soft Lead
    By smokenpowder in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 01-22-2012, 08:40 PM
  5. RCBS 800 Watt Lead Melter
    By smokenpowder in forum Wanted/For Sale Items
    Replies: 0
    Last Post: 11-21-2011, 09:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •