Hello I have a 44 cal euroarms that needs the barrel catch put back on the barrel. Is there a type of adhesive or other material that I should put on to keep it cemented on thanks in advance
Hello I have a 44 cal euroarms that needs the barrel catch put back on the barrel. Is there a type of adhesive or other material that I should put on to keep it cemented on thanks in advance
If the first one fell out, the next one probably will too. I have used silver solder for this with good results.
I would recommend using a low-temp silver solder so you do not warp the barrel with too much heat.
Brownells sells a good low-temp solder that you can melt with a propane torch. Use some good flux as well to ensure that the solder flows good.
Bookmarks